Oil Reset Procedure: Ford E-350 2009-2021
Oil Reset Procedure for Ford E-350 2009-2021
Simple to follow oil reset procedure for Ford E-350 for the year 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and 2021.
Ford E-350 oil reset procedure for the year 2009 through 2010.
1. Turn ignition to the “RUN” position.
2. Press the “SELECT/RESET” stem button to display “OIL LIFE = % HOLD RESET = NEW”.
3. Press and hold the “SELECT/RESET” stem for 2 seconds to reset to 100%.
4. Turn ignition off.
Ford E-350 oil reset procedure for the year 2009 through 2010.
1. Switch the ignition ON, do not start the engine.
2. Press and release the SELECT/RESET stem to display “OIL LIFE = XXX% HOLD RESET = NEW”.
3. Press and hold the SELECT/RESET stem for two seconds and release. Oil life is set to XX% and “OIL LIFE SET TO XXX%” is displayed.
4. To change oil life 100% miles value from 7,500 miles (12,000 km) or six months to another value, proceed to Step 5.
5. Once “OIL LIFE SET TO XXX%” is displayed, release and press the RESET control switch to change the Oil Life Start Value.
6. Each release and press will reduce the value by 10%.
Ford E-350 oil reset procedure for the year 2009 through 2015.
1. Turn ignition to the “RUN” position.
2. Press the “SELECT/RESET” stem button to display “OIL LIFE = % HOLD RESET = NEW”.
3. Press and hold the “SELECT/RESET” stem for 2 seconds to reset to 100%.
4. Turn ignition off.
Ford E-350 oil reset procedure for the year 2010 through 2015.
1. Turn ignition to the “RUN” position.
2. Press the “SELECT/RESET” stem button to display “OIL LIFE = % HOLD RESET = NEW”.
3. Press and hold the “SELECT/RESET” stem for 2 seconds to reset to 100%.
4. Turn ignition off.
Ford E-350 oil reset procedure for the year 2021.
1. Turn the ignition switch to the RUN position (do not start the engine). For vehicles with push-button start, press and hold the start button for two seconds without pressing the brake pedal. Do not attempt to start the engine.
2. Press the brake and accelerator pedals at the same time.
3. Keep the pedals fully depressed.
4. After three seconds, the “Service: Oil reset in prog.” message will be displayed.
5. After 25 seconds, the “Service: Oil reset complete” message will be displayed.
6. Release both the accelerator and brake pedals.
7. The “Service: Oil reset complete” message will no longer be displayed.
8. Rotate the key to the OFF position.
9. Start the vehicle. Make sure that the oil life telltale is not illuminated in the IPC, and the oil change reminder message is no longer displayed in the message center.
About Ford E-350
In 1982, Ford introduced an option for a 6.9-liter IDI diesel V8 engine that was manufactured by International Harvester. In 1988, this engine size was increased to 7.3 liters so that it could improve the fuel economy of the Econoline without significantly reducing the engine’s output. The Econoline 350 was the only model that offered the diesel V8 engines (or Club Wagons sold on the same chassis). The cutaway model was offered with either the larger gasoline V8s (5.8 or 7.5 L) or the diesel V8.
Ford stopped producing full-size vans with manual transmissions after the 1989 model year because of the growing demand for full-size vans equipped with automatic transmissions. After 1986, the standard manual transmission was changed to a floor-shifted 4-speed overdrive transmission, which had previously been a 3-speed column shift. In 1988, a Mazda-derived five-speed M5OD transmission took the place of the previous four-speed.
