Citroen Synergie 1997-2002 KeyFob Remote Keyless Entry Programming Procedure
How to Program Citroen Synergie KeyFob Remote Keyless Entry for the year 1997 and 2002.
Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst vehicle is out of range and central locking / alarm system becomes inoperative, carry out the following reinitializing procedure.
- Switch the ignition to the “ON” position
- Wait for alarm system LED to turn “OFF” (if LED fitted) or wait for approximately 10 seconds (If LED not fitted)
- Within 30 seconds: Press either the “Lock” or “Un-lock” button on the key fob
- Within 10 seconds: Press either the “Lock” or “Un-lock” button on the key fob.
- Ensure alarm system LED (if fitted) turns “ON” for a split second.
- Key fob is re-initialized.
- Repeat above procedure to re-initialize any remaining key fobs.
- Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.
About Citroen Synergie
The Citroën Synergie, sold in Europe as the Citroën Evasion, was a minivan automobile produced by the French manufacturer Peugeot from 1994 to 2002.
The Evasion design was developed in the joint-venture Sevel Nord project set up by the PSA Group and Fiat; the Peugeot 806, Fiat Ulysse and Lancia Zeta are badge-engineered versions of the same car. All four were assembled at the Sevel Nord factory in Valenciennes, France. The Evasion was badged Synergie in the right hand drive markets of the United Kingdom and the Republic of Ireland, presumably due to the existence of the English word “evasion” which is pronounced differently from the French and has somewhat negative connotations. However, the car retained the Evasion name in Australia and New Zealand. (Source Tractors Fandom.com)