TPMS Reset: Honda Pilot 2005-2008 Tire Pressure Sensor

Honda Pilot 2005-2008 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Honda Pilot for the year 2005, 2006 and 2008.

No special tools are required to perform this procedure, however a properly formatted TPMS scan tool may expedite the relearn process.

Sensor Relearn Procedure without a Scan Tool

1. Inflate all tires to the pressure listed on the placard.

2. Drive the vehicle for at least 15 minutes at a speed of 30 MPH or more for the system to learn the new sensor IDs.

Sensor Relearn procedure with a Scan Tool (Not Available On All Models)

1. Inflate all tires to the pressure listed on the placard.

2. Starting with the LF tire, use a properly formatted scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).

3. Turn ignition to the ON position.

4. Connect the scan tool to the vehicle’s OBDII Port and upload the sensor IDs.

5. Turn the ignition to the OFF position.

6. To turn off the flashing TPMS light, scan each sensor and drive the vehicle for at least 10 minutes at a speed of 30 MPH or more.

About Honda Pilot

The Honda Pilot is a mid-size crossover SUV manufactured by Honda and introduced in 2002.

Primarily aimed at the North American market, the Pilot is the largest SUV from Honda and features three-row seating. Pilots are currently manufactured in Lincoln, Alabama, and the Pilot was produced in Alliston, Ontario until April 2007. The first generation Pilot was released in April 2002 as a 2003 model.

The Pilot shares its platform with the Acura MDX, as well as the North American market Odyssey minivan. The Pilot’s unibody construction and independent suspension are designed to provide handling similar to that of a car, and it has integrated perimeter frame rails to allow towing and light off-road use. (Source Wiki)