TPMS Reset: Honda Pilot 2009-2015 Tire Pressure Sensor

TPMS Reset-Honda Pilot 2009-2015 Tire Pressure Sensor

Honda Pilot 2009-2015 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Honda Pilot for the year 2005, 2010 and 2015.

No special tools are required to perform this relearn procedure. A properly formatted TPMS scan tool can be used for an alternate method.

Sensor Relearn Procedure without a properly formatted TPMS scan tool:

Sensor Relearn Procedure without a scan tool

1. Ensure tires are inflated to the pressure indicated on the tire placard.

2. Drive vehicle for at least 15 minutes above 30mph in order for system to learn new sensor IDs.

Sensor Relearn Procedure with a properly formatted TPMS scan tool:

1. Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR & full size spare (if equipped).

2. Turn ignition to the ON position.

3. Connect scan tool to OBDII port and upload sensor IDs.

4. Turn ignition to the OFF position and unplug the scan tool.

5. To turn off the flashing TPMS light, with the engine running, scan each sensor again and drive the vehicle for 10 minutes above 30mph.

 

About Honda Pilot

The third-generation 2016 Pilot debuted at the Chicago Auto Show in February 2015, and production began in May. It was made available for sale in June.

The exterior is sleeker in appearance compared to its boxier predecessor with a 10 percent reduction in drag area. Added to the exterior are standard LED brake and tail lights, LED daytime running lights (DRLs) on EX trims and above, and LED headlamps with automatic high-low beam switching the on new Elite model. The Elite trim level also gained features that were new to the Pilot, including ventilated front seats, heated rear seats, and a panoramic roof. Alloy wheels became standard. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *