TPMS Reset: BMW M4 2015 Tire Pressure Sensor

BMW M4 2015 Tire Pressure Monitoring System TPMS Reset
Simple steps to follow on how to reset the TPMS service maintenance indicator warning light on BMW M4 for the year 2015.
No special tools are required to perform this relearn procedure.
Relearn Procedure for Models Equipped with iDrive:
1. Inflate all tires to pressure listed on tire placard.
2. Turn the ignition to the ON/RUN position with the engine OFF.
3. Using the iDrive controller, select Settings or Vehicle Info.
4. Select Vehicle, Vehicle/Tires or Vehicle Status.
5. Select TPM, Reset TPM or Preform Reset.
6. Start the engine and select Reset, then Yes.
7. Press media control located on the center console.
8. Vehicle must be driven for up to 10 minutes, at a speed of 25 MPH or more, to complete relearn.
Relearn Procedure for Models NOT Equipped with iDrive:
1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Move the turn signal toggle switch up or down until the TPMS telltale and REST are displayed.
4. Press the button at the end of the turn signal lever.
5. Press, and hold button, at the end of the turn signal lever until RESETTING or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.
Relearn Procedure for Models NOT Equipped with iDrive (only select models):
1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Hold down the TPMS Reset button (located under the hazards switch or in front
of the gear selector) until the TPMS light illuminates on the gauge cluster.
4. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.
About BMW M4
The BMW M4 is a high-performance version of the BMW 4 Series coupes and convertibles developed by BMW’s motorsport division, BMW M.
As part of the renumbering that splits the 3 Series coupé and convertible models from the 4 Series (to further differentiate it from the 3 Series), the M4 replaced the BMW M3 coupé and convertible models. Upgrades over the standard BMW 4-Series include an upgraded engine, suspension, brakes and weight reduction measures including increased use of carbon fibre, such as on the roof of the car. (Source Wiki)