TPMS Reset: BMW Active Hybrid 3 2013-2015 Tire Pressure Sensor
BMW Active Hybrid 3 2013-2015 Tire Pressure Monitoring System TPMS Relearn
Quick guide on how to reset the TPMS service maintenance indicator warning light on BMW Active Hybrid 3 from the year 2013 and 2015.
No special tools are required to perform this relearn procedure.
Relearn Procedure for Models Equipped with iDrive:
1. Inflate all tires to pressure listed on tire placard.
2. Turn the ignition to the ON/RUN position with the engine OFF.
3. Using the iDrive controller, select Settings or Vehicle Info.
4. Select Vehicle, Vehicle/Tires or Vehicle Status.
5. Select TPM, Reset TPM or Preform Reset.
6. Start the engine and select Reset, then Yes.
7. Press media control located on the center console.
8. Vehicle must be driven for up to 10 minutes, at a speed of 25 MPH or more, to complete relearn.
Relearn Procedure for Models NOT Equipped with iDrive:
1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Move the turn signal toggle switch up or down until the TPMS telltale and REST are displayed.
4. Press the button at the end of the turn signal lever.
5. Press, and hold button, at the end of the turn signal lever until RESETTING or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.
Relearn Procedure for Models NOT Equipped with iDrive (only select models):
1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Hold down the TPMS Reset button (located under the hazards switch or in front
of the gear selector) until the TPMS light illuminates on the gauge cluster.
4. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.
About BMW Active Hybrid 3
Based on the 335i Sedan, the ActiveHybrid 3 includes a 40 kW (54 hp) synchronous electric motor, a lithium-ion battery positioned underneath the luggage area and a 2-zone climate control system with stationary air conditioning. The electric motor generates 210 N⋅m (150 lb⋅ft) of torque. The maximum all-electric driving range is 4 km (2.5 mi), with a top speed of 75 km/h (47 mph).
The BMW ActiveHybrid 3 was unveiled at the North American International Auto Show in January 2012.
The US EPA rated the 2013 ActiveHybrid 3 with a combined fuel economy of 28 mpg‑US (8.4 L/100 km), with 25 mpg‑US (9.4 L/100 km) in the city, and 33 mpg‑US (7.1 l/100 km) on the highway. (Source Wiki)
