Oil Reset Procedure: Pontiac G3 2009-2010

Oil Reset Procedure for Pontiac G3 2009-2010

Easy to follow oil reset procedure for Pontiac G3 for the year 2009 and 2010.

Oil Reset Procedure for Pontiac G3 for the year 2009

1. Turn the ignition to run (one position before starting engine).

2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.

3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil Reset Procedure for Pontiac G3 for the year 2009 through 2010

1. Turn ignition to the “RUN” position and immediately press and release the accelerator pedal 3 times within 5 seconds.

2. Turn ignition off.

Or you can also try this procedure;

1. Turn ignition switch to ON position with engine off

2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key

3. Change Oil lamp will flash for 2-10 seconds while it resets

4. Once it stops flashing, the maintenance light reset is complete

5. Turn key to OFF position and then start engine to verify indicator is no longer illuminated

Additional Pontiac G3 Oil Reset Light Procedure Information

About Pontiac G3

The Chevrolet Aveo (T200) is the first generation of the Chevrolet Aveo, a subcompact automobile nameplate from General Motors’ Chevrolet division. The T200 was introduced in 2002 by Daewoo, an initially independent South Korean manufacturer that later became GM Korea. It was initially marketed as the Daewoo Kalos before being rebranded as the Chevrolet Aveo. During the development of the car, the model received the T200 internal codes. The T250 code was assigned to the model’s significant facelift. (Source: Wiki)