counter create hit

Oil Reset Procedure: Lexus LX 570 2008-2015

0
Oil Reset Procedure Lexus LX 570 2008-2015

Oil Reset Procedure for Lexus LX 570 2008-2015

 

 

Simple to follow oil reset procedure for Lexus LX 570 for the year 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018.

 

 

 

Oil Reset Procedure for Lexus LX 570 for the year 2008 through 2009

1. With the engine running, display trip meter “A”, and turn ignition off.

2. Press and hold the “TRIP METER RESET” knob, and turn ignition to the “RUN” position (press “START/STOP” button once).

3. Continue to hold the knob until the display indicates that the reset is complete.

4. Turn ignition off.

Oil Reset Procedure for Lexus LX 570 for the year 2010

1. With the engine running, display trip meter “A”, and turn ignition off.

2. Press and hold the “TRIP METER RESET” knob, and turn ignition to the “RUN” position (press “START/STOP” button once).

3. Continue to hold the knob until the display indicates that the reset is complete.

5. Turn ignition off.

Oil Reset Procedure for Lexus LX 570 for the year 2011

1. With the engine running, display trip meter “A”, and turn ignition off.

2. Press and hold the “TRIP METER RESET” knob, and turn ignition to the “RUN” position (press “START/STOP” button once).

3. Continue to hold the knob until the display indicates that the reset is complete.

4. Turn ignition off.

Oil Reset Procedure for Lexus LX 570 for the year 2013 through 2015

1. With the engine running, display trip meter “A”, and turn ignition off.

2. Press and hold the “TRIP METER RESET” knob, and turn ignition to the “RUN” position (press “START/STOP” button once).

3. Continue to hold the knob until the display indicates that the reset is complete.

4. Turn ignition off.

 

 

 

 

About Lexus LX 570

At the New York International Auto Show on April 4, 2007, Lexus made its public debut with the LX 570 for the 2008 model year. It underwent a comprehensive redesign, and the first iteration was released before the Land Cruiser counterpart that had been anticipated. In 2004, the design submitted by Shinichi Hiranaka was deemed satisfactory, and in 2010, his revised submission was also deemed satisfactory. It comes equipped with a brand-new 5.7 L 3UR-FE V8 engine that is certified by UL EV-II. The amount of power produced is 286 kW (383 hp), and the amount of torque produced is 546 Nm (403 lb-ft). The more powerful engine contributes to an increased towing capacity that can reach up to 3,900 kilograms (8,500 lb).

The powertrain consists of a six-speed sequential-shift automatic transmission, an all-new four-wheel drive system, and a Torsen center differential. The engine is connected to the transmission. 2002 was the year that saw the beginning of production for both the Land Cruiser (J200) and the Lexus LX equivalent. The final design was approved in the year 2004, and testing on development prototypes continued until the beginning of 2007, while testing on pre-production models continued until the end of 2007. On March 27, 2007, the final design patent for the J200 series Lexus LX was submitted to the United States Patent and Trademark Office.

The LX 570 is 102 millimeters (four inches) longer overall and 25 millimeters (one inch) wider, but it has the same wheelbase as its predecessor. It suffers damage to the plastic cladding on the lower body sides, exposing the paint underneath. High-tensile steel is used in the construction of one-third of the frame’s body mass as well as the entirety of the B-pillar. Hydroformed steel is used in the construction of all three crossmembers. Similar to the Toyota Tundra, the tow hitch is built into the frame of the vehicle.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!