Oil Reset Procedure: GMC Yukon 2000-2015

Oil Reset Procedure for GMC Yukon 2000-2015

Simple to follow oil reset procedure for GMC Yukon for the year 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015.

GMC Yukon oil reset procedure for the year 2000 through 2006

1. Turn ignition to the “RUN” position.

2. Immediately press and release the accelerator pedal 3 times within 5 seconds.

3. If the light flashes the system is reset. Turn ignition off.

GMC Yukon oil reset procedure for the year 2007 through 2009

1. Turn ignition to the “RUN” position. Display “OIL LIFE REMAINING” on the DIC.

2. Press and hold the “SET/RESET” button for more than 5 seconds.

3. Oil life will reset to 100%. Turn ignition off.

4. If vehicle does not have DIC, vehicle must be in park to access the display by pressing the trip odometer reset stem.

5. Press and hold for more than 5 seconds and oil life will reset to 100%. Turn ignition off.

6. Alternative method is to turn ignition to “RUN” position and press and release accelerator pedal 3 times within 5 seconds.

7. Turn ignition off.

GMC Yukon oil reset procedure for the year 2007 through 2014

1. Turn ignition to the “RUN” position. Display “OIL LIFE REMAINING” on the DIC.

2. Press and hold the “SET/RESET” button for more than 5 seconds.

3. Oil life will reset to 100%. Turn ignition off.

4. If vehicle does not have DIC, vehicle must be in park to access the display by pressing the trip odometer reset stem.

5. Press and hold for more than 5 seconds and oil life will reset to 100%. Turn ignition off.

6. Alternative method is to turn ignition to “RUN” position and press and release accelerator pedal 3 times within 5 seconds.

7. Turn ignition off.

GMC Yukon oil reset procedure for the year 2008 through 2014

1. Turn ignition to the “RUN” position. Display “OIL LIFE REMAINING” on the DIC.

2. Press and hold the “SET/RESET” button for more than 5 seconds.

3. Oil life will reset to 100%. Turn ignition off.

4. If vehicle does not have DIC, vehicle must be in park to access the display by pressing the trip odometer reset stem.

5. Press and hold for more than 5 seconds and oil life will reset to 100%. Turn ignition off.

6. Alternative method is to turn ignition to “RUN” position and press and release accelerator pedal 3 times within 5 seconds.

7. Turn ignition off.

GMC Yukon oil reset procedure for the year 2015

1. Turn ignition to the “RUN” position. Display “OIL LIFE REMAINING” on the DIC.

2. Press and hold the “SET/RESET” button for more than 5 seconds.

3. Oil life will reset to 100%. Turn ignition off.

4. If vehicle does not have DIC, vehicle must be in park to access the display by pressing the trip odometer reset stem.

5. Press and hold for more than 5 seconds and oil life will reset to 100%. Turn ignition off.

6. Alternative method is to turn ignition to “RUN” position and press and release accelerator pedal 3 times within 5 seconds.

7. Turn ignition off.

About GMC Yukon

The Chevrolet Tahoe and its GMC Yukon counterpart are full-size SUVs produced by General Motors since 1994 and 1991, respectively. Since 1982, Chevrolet and GMC have sold two different-sized SUVs under the ‘Blazer’ and ‘Jimmy’ nameplates, with the smaller S-10 Blazer and GMC S-15 Jimmy introduced for the 1983 model year, below the full-size Blazer and Jimmy models. This state of affairs persisted until the early 1990s.