counter create hit

Oil Reset Procedure: Ford Fusion 2008-2020

Oil Reset Procedure Ford Fusion 2008-2020

Oil Reset Procedure for Ford Fusion 2008-2020



Simple to follow oil reset procedure for Ford Fusion for the year 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020.



Ford Fusion oil reset procedure for the year 2008 through 2009

1. Turn the key to indicator. Do not start the engine. For push button ignitions, just press the button once without holding the brake. Do not start the engine.

2. For turn key ignitions, press both the gas and brake simultaneously for about 20 seconds. For push button models, press and hold the button and the gas pedal simultaneously for about 20 seconds. The display will say “Resetting Oil“. Keep pressed until it says completed.


Ford Fusion oil reset procedure for the year 2010 through 2012

1. Turn ignition to the “RUN” position.

2. Press the “SETUP”, “OIL LIFE % HOLD RESET = NEW” will be displayed.

3. Press and hold “RESET” button for 2 seconds to reset to 100% and “OIL LIFE SET TO 100%” will be displayed.

4. Turn ignition off.

Ford Fusion oil reset procedure for the year 2013

1. Turn ignition to the “RUN” position.

2. Press both the brake and accelerator pedals at the same time.

3. After 3 seconds, the “SERVICE: OIL RESET IN PROG.” message will be displayed.

4. After 25 seconds, the “SERVICE: OIL RESET COMPLETE” message will be displayed.

5. Release the brake and gas pedals.

6. Turn ignition off.


Ford Fusion oil reset procedure for the year 2014 through 2015

1. Turn ignition to the “RUN” position.

2. Use the up and down arrows to scroll through the menu and select “SETTINGS”.

3. Select “OIL LIFE RESET”.

4. Hold “OK” to reset.

5. Turn ignition off.


Ford Fusion oil reset procedure for the year 2013 through 2020

1. Get in the car and turn it on

2. Hit the ◄ left button until you got to the main menu

3. From there go to the SETTINGS

4. Next, highlight and select the VEHICLE

5. There’s an option right here that says OIL LIFE RESET. So scroll down to that and hit OK

6. To reset it, you just press and hold OK and it’s gonna get that reset for you



About Ford Fusion

The Ford Motor Company is responsible for the production and marketing of a mid-size automobile known as the Ford Fusion. The Fusion has been manufactured in gasoline, gas/electric hybrid, and gas/plug-in electric hybrid iterations over the course of two generations, beginning with the 2006 model year and continuing through the 2020 model year. Together with its rebadged variant the Lincoln MKZ and formerly the Mercury Milan, both of which share its CD3 platform, the Ford Fusion was produced at Ford’s Hermosillo Stamping and Assembly plant in Sonora, Mexico. This plant is located in the same state as Mexico.

On August 1, 2005, manufacturing of the very first Fusions got under way. The Mondeo was replaced by the Fusion in the markets of Latin America, with the exception of Argentina, where the current generation of the European Mondeo is still sold, as well as the markets of the United States and Canada (where it superseded the then mid-size Taurus and the compact Contour). The Fusion fills the space between the more compact Ford Focus and the full-size Ford Taurus in Ford’s lineup. This model is sold alongside the Mondeo in countries located in the Middle East. Only the 2.5-liter engine is available in the models that are sold in that region. There is no V6 engine that can be purchased in that region, in contrast to the United States of America, Canada, and Latin America. The situation is exactly the same in South Korea, where the 2.5-liter engines are the only ones that can be purchased (including those for the hybrid model) as of the 2012 model year.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!