Oil Reset Procedure: Ford Fiesta 2011-2019

Oil Reset Procedure Ford Fiesta 2011-2019

Oil Reset Procedure for Ford Fiesta 2011-2019

 

 

Simple to follow oil reset procedure for Ford Fiesta for the year 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019.

 

 

Ford Fiesta oil reset procedure for the year 2011 through 2013.

1. Turn ignition to the “RUN” position.

2. Press both the brake and accelerator pedals at the same time for 20 seconds. The oil lamp will illuminate and “ENGINE OIL CHANGE DUE NEXT SERVICE” will be displayed.

3. Turn ignition off.

Ford Fiesta oil reset procedure for the year 2012 through 2013.

1. Start with the ignition switch in OFF position

2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position
* For vehicles with push-button start, press accelerator pedal only

3. Turn the ignition to the RUN position (do not start engine)
* For vehicles with push-button start, push the START/STOP button once quickly, then while still holding the accelerator pedal, depress the brake pedal also

4. Keep both pedals fully depressed for at least 20 seconds

5. Turn the vehicle to the OFF position, then start the vehicle to verify oil change reminder is no longer displayed and/or the light is no longer illuminated

Ford Fiesta oil reset procedure for the year 2014 through 2015.

1. Turn ignition to the “RUN” position.

2. Press both the brake and accelerator pedals at the same time.

3. After 3 seconds, the “SERVICE: OIL RESET IN PROG.” message will be displayed.

4. After 25 seconds, the “SERVICE: OIL RESET COMPLETE” message will be displayed. Release the brake and gas pedals.

5. Turn ignition off.

Or you can also try this procedure;

1. Turn the ignition to the ON position without starting the engine
* For vehicles with push-button start, press and hold the START button for 2 seconds without pressing the brake pedal to put in ON mode

2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position

3. After 3 seconds, the message center displays “Service: Oil Reset In Prog”

4. Continue to hold both the accelerator and brake pedals for 25 seconds or until the display shows “Service: Oil Reset Complete”

5. Release both pedals and place ignition in the OFF position/mode

Ford Fiesta oil reset procedure for the year 2011 through 2019.

1. Switch the ignition on. Do not start the engine.

2. Fully press the accelerator and brake pedals at the same time.

3. Keep the accelerator and brake pedals fully pressed.

4. After three seconds, a message appears confirming that the reset is in progress.

5. After 25 seconds, a message appears confirming that the reset is complete.

6. Release the accelerator and brake pedals.

7. Switch the ignition off.

 

 

 

About Ford Fiesta

 

Since it was first introduced in 1976, Ford has produced seven distinct generations of its supermini car known as the Fiesta. Over the course of its existence, Ford’s European operations have been primarily responsible for the development and production of the Fiesta. The Fiesta has always been positioned below the Escort (later the Focus).

Since its introduction in 1976, the Ford Fiesta has racked up over 22 million sales, making it one of the company’s most successful marques, right behind the Escort and the F-Series. The United Kingdom, Germany, Spain, Brazil, Argentina, Venezuela, Mexico, Taiwan, China, India, Thailand, and South Africa have all been responsible for its production at some point.

It is anticipated that production of the Fiesta will end in June 2023, after a total of 20 million have been produced; the Fiesta was largely superseded by newer models. As restrictions on vehicles powered by internal combustion engines became more widespread, the Ford Puma hybrid emerged as the more economically viable option.

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © All rights reserved. | CoverNews by AF themes.