Oil Reset Procedure: Ford F-450 2009-2021

Oil Reset Procedure Ford F-450 2009-2021

Oil Reset Procedure for Ford F-450 2009-2021

 

 

Easy to follow oil reset procedure for Ford F-450 for the year 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and 2021.

 

 

Ford F-450 oil reset procedure for the year 2009 through 2010.

1. Turn ignition to the “RUN” position.

2. Press the “SELECT/ RESET” stem button to display “OIL LIFE = % HOLD RESET = NEW”.

3. Press and hold the “SELECT/RESET” stem for 2 seconds to reset to 100%.

4. Turn ignition off.

If equipped with message center:

1. Turn ignition to the “RUN” position.

2. Use the controls on the left of the steering wheel to scroll through menu.

3. Press the up and down arrow buttons to select “SETTINGS” and then “VEHICLE”.

4. Select “OIL LIFE RESET %” and then “OK” to reset.

5. Turn ignition off.

Ford F-450 oil reset procedure for the year 2010 through 2014.

1. Turn ignition to the “RUN” position.

2. Press the “SELECT/ RESET” stem button to display “OIL LIFE = % HOLD RESET = NEW”.

3. Press and hold the “SELECT/RESET” stem for 2 seconds to reset to 100%.

4. Turn ignition off.

If equipped with message center:

1. Turn ignition to the “RUN” position.

2. Use the controls on the left of the steering wheel to scroll through menu.

3. Press the up and down arrow buttons to select “SETTINGS” and then “VEHICLE”.

4. Select “OIL LIFE RESET %” and then “OK” to reset.

5. Turn ignition off.

 

Ford F-450 oil reset procedure for the year 2011 through 2014.

1. Turn ignition to the “RUN” position.

2. Press the “SELECT/ RESET” stem button to display “OIL LIFE = % HOLD RESET = NEW”.

3. Press and hold the “SELECT/RESET” stem for 2 seconds to reset to 100%.

4. Turn ignition off.

If equipped with message center:

1. Turn ignition to the “RUN” position.

2. Use the controls on the left of the steering wheel to scroll through menu.

3. Press the up and down arrow buttons to select “SETTINGS” and then “VEHICLE”.

4. Select “OIL LIFE RESET %” and then “OK” to reset.

5. Turn ignition off.

Ford F-450 oil reset procedure for the year 2015.

1. Turn ignition to the “RUN” position.

2. Use the controls on the left of the steering wheel to scroll through menu.

3. Press the up and down arrow buttons to select “SETTINGS” and then “VEHICLE”.

4. Select “OIL LIFE RESET %” and then “OK” to reset.

5. Turn ignition off.

 

Ford F-450 oil reset procedure for the year 2021.

1. Turn the ignition switch to the RUN position (do not start the engine). For vehicles with push-button start, press and hold the start button for two seconds without pressing the brake pedal. Do not attempt to start the engine.

2. Press the brake and accelerator pedals at the same time.

3. Keep the pedals fully depressed.

4. After three seconds, the “Service: Oil reset in prog.” message will be displayed.

5. After 25 seconds, the “Service: Oil reset complete” message will be displayed.

6. Release both the accelerator and brake pedals.

7. The “Service: Oil reset complete” message will no longer be displayed.

8. Rotate the key to the OFF position.

9. Start the vehicle. Make sure that the oil life telltale is not illuminated in the IPC, and the oil change reminder message is no longer displayed in the message center.

 

 

 

 

About Ford F-450

Ford introduced the F-450 and F-550 Super Duty variants to bridge the gap between the pickup line and the much larger medium-duty F-650/F-750; with available GVWRs ranging from 17,950 to 19,500 lb, it pushes the Super Duty into the Class 5 truck market. Both versions had dual rear wheels and were only available as a chassis cab.

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © All rights reserved. | CoverNews by AF themes.