Oil Reset Procedure: Dodge Journey 2008-2020
Oil Reset Procedure for Dodge Journey 2008-2020
Simple to follow oil reset procedure for Dodge Journey for the year 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020.
Dodge Journey oil reset procedure for the year 2009 through 2010.
1. Turn ignition to the “RUN” position.
2. Immediately press and release the accelerator pedal 3 times within 10 seconds.
3. Turn ignition off.
Dodge Journey oil reset procedure for the year 2011 through 2012.
1. Turn ignition to the “RUN” position.
2. Immediately press and release the accelerator pedal 3 times within 10 seconds.
3. Turn ignition off.
Dodge Journey oil reset procedure for the year 2010 through 2015.
1. Turn ignition to the “RUN” position.
2. Immediately press and release the accelerator pedal 3 times within 10 seconds.
3. Turn ignition off.
Or you can also try this procedure;
1. Turn the ignition to the “ON/RUN” position. For push button start models, press the “Engine Start/Stop” button once without holding the brake pedal. Do not start the engine.
2. Press the Accelerator pedal all the way down slowly 3 times within a 10 second interval.
3. Turn the ignition to “OFF/LOCK“. For push button start models, press the “Engine Start/Stop” button once without holding the brake pedal to turn the electronics off.
Dodge Journey oil reset procedure for the year 2008 through 2020.
1. Switch the car to the RUN position
With your foot not on the brake pedal, you’re going to press the START button twice to take it to the run position
2. Fully depress the GAS PEDAL three times
And then you need to press the accelerator pedal three times slowly within 10 seconds
3. Turn the ignition off and start the engine to verify the indicator has been reset.
About Dodge Journey
The Dodge Journey is a mid-size crossover SUV produced and marketed by Fiat Chrysler Automobiles’ Dodge brand from 2009 to 2020, with a facelift for the 2011 model year. The Journey was designed by Ryan Nagode and was sold worldwide in both left and right hand drive configurations, including as the Fiat Freemont.
The Journey, internally known as the JC49, is based on FCA’s global D-segment platform and has a nearly identical wheelbase to the outgoing short wheel base (SWB) Dodge Caravan.
The Journey first appeared at the 2007 Frankfurt Motor Show and then again at the 2009 Frankfurt Motor Show. All models were produced in Mexico at FCA’s Toluca Assembly plant, with just over 1.1 million produced previously.
The Dodge Journey was offered in two different trim levels for the 2020 model year: the SE Value as the entry-level option and the Crossroad as the “up-level” alternative. All models of the 2020 Dodge Journey were equipped with a 2.4-liter inline-four gasoline engine that produced 173 horsepower and 166 lb-ft of torque, mated to a four-speed automatic transmission, and offered front wheel drive as an available drivetrain. The 3.6-liter Pentastar Variable Valve Timing (VVT) V6 gasoline engine, six-speed automatic transmission, and the All Wheel Drive option have all been taken off the market. The Journey models included seating for seven passengers across three rows, which was previously only available as an option on the base trim levels. The various options and bundles that are available have been modified. In addition, for the 2020 model year, the Journey, along with the Dodge Grand Caravan, will not be made available in states that have adopted California’s stringent emissions regulations. Dodge cited their decision to transition to a performance brand as the reason for ending production of the Journey after the 2020 model year.
