KeyFob RKE Programming Procedure: Renault Trafic 1995-2002

Renault Trafic (Petrol) 1995-2002 KeyFob Remote Keyless Entry Programming Procedure

How to Program Renault Trafic (Petrol) KeyFob Remote Keyless Entry for the year 1995-2002

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly.

Renault key fobs are usually fitted with a serial number which is located under the cover inside the key fob and can be viewed after removing fixing screw.

Note. Only key fobs fitted with an 8 character serial number can be programmed manually. Key fobs with a 5 character serial number – do not require programming. All other variations on the number of characters used for the serial numbers require diagnostic equipment to program the key fobs.

Ensure the ignition switch is “OFF”
Press and hold in the central locking button inside the vehicle for a minimum of 5 seconds
Vehicle doors should “Lock” and then “Unlock”
Within the next 10 to 15 seconds:
- On the first key fob: Press the “Lock / Unlock” button twice (can be once on some
  models)

- On the second key fob: Press the “Lock / Unlock” button twice (can be once on some models)
Vehicle doors should “Lock” and then “Unlock”
Key fobs are re-programmed.
Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.

About Renault Trafic

In May 1989, the Trafic underwent a major front end facelift, with a rounder shape and a plastic bumper, and the new longer body shape covering all varieties of engine. In 1995, the Mk1 Trafic got its final facelift, with new grille, new tail lights, large double rear view mirrors, and a new interior with modern dashboard and multi adjustable seats.

This version was also sold as the Opel Arena from 1997. (Source Wiki)