KeyFob RKE Programming Procedure: Renault 19 1993-1996

Renault 19 1993-1996 KeyFob Remote Keyless Entry Programming Procedure

 

 

How to Program Renault Scenic KeyFob Remote Keyless Entry for the year 1993-1996

 

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly.

Renault key fobs are usually fitted with a serial number which is located under the cover inside the key fob and can be viewed after removing fixing screw.

Note. Only key fobs fitted with an 8 character serial number can be programmed manually. Key fobs with a 5 character serial number – do not require programming. All other variations on the number of characters used for the serial numbers require diagnostic equipment to program the key fobs.

 

  • Ensure the ignition switch is “OFF”
  • Press and hold in the central locking button inside the vehicle for a minimum of 5 seconds
  • Vehicle doors should “Lock” and then “Unlock”
  • Within the next 10 to 15 seconds:
    • On the first key fob: Press the “Lock / Unlock” button twice (can be once on some
      models)

KeyFob RKE Programming Procedure: Renault 19 1993-1996

 

    • On the second key fob: Press the “Lock / Unlock” button twice (can be once on some models)
  • Vehicle doors should “Lock” and then “Unlock”
  • Key fobs are re-programmed.
  • Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.

 

About Renault 19

The last models (1995 to 1996) were called Executive and came with leather interior as standard.

A 16S version was also produced in Europe which was equipped as above – however, the earliest models did not sport the bonnet vent. The Phase 2 models gear ratios were also revised, to allow for the extra weight found in the safety equipment the later models carried.

Renault claimed an acceleration from 0 to 100 km/h (62 mph) of 8.2 seconds for the non-catalysed version with 140 PS (103 kW; 138 hp). This engine was only available in the Phase 1 model. The catalysed model boasted 137 PS (101 kW; 135 hp) and a top speed of 215 km/h (134 mph), and a claimed 0 to 100 km/h time of 8.9 seconds. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *