counter create hit

TPMS Reset: Ford Explorer 2006-2019 Tire Pressure Sensor

0
TPMS Reset-Ford Explorer 2006-2019 Tire Pressure Sensor

Ford Explorer 2006-2019 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Ford Explorer for the year 2006, 2010, 2011, 2015, 2016, 2018, 2017 and 2019.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Relearn Procedure for Models WITH STANDARD IGNITION

1. Inflate all tires to pressure listed on vehicle placard.

2. Leave the driver’s door open during the relearn procedure.

3. Turn ignition to OFF position and press and release brake pedal.

4. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.

5. Press and release brake pedal.

6. Turn ignition to OFF position.

7. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.

8. Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.

9. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.

10. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.

11. Turn ignition to the OFF position.

Relearn Procedure for Models WITH PUSH-BUTTON IGNITION

NOTE: some models require the ignition button to be pressed twice, without pressing the brake, to enter the RUN mode (Ignition ON/Engine OFF). If this is the case, then modify steps 4 and 6 as noted.

1. Inflate all tires to pressure listed on vehicle placard.

2. Leave the driver’s door open during the relearn procedure.

3. With the vehicle OFF, press and release the brake pedal.

4. Press the IGNITION BUTTON 5 times (NOTE: 8 times if 2x-to-RUN).

5. Press and release the brake pedal.

6. Press the IGNITION BUTTON 6 times (NOTE: 9 times if 2x-to-RUN). Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.

7. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once after each sensor has been recognized.

8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.

9. Press the IGNITION BUTTON 1 time to turn the vehicle OFF.

About Ford Explorer

The sixth-generation Ford Explorer officially debuted on January 9, 2019, ahead of the 2019 North American International Auto Show. The 2020 Ford Explorer is built on the new rear-wheel-drive based CD6 platform shared with the new Lincoln Aviator.

A high-performance Ford Explorer ST model will also be offered. The turbocharged 2.3-liter EcoBoost inline-four is the standard engine on the new Explorer, with 300 hp (224 kW) and 310 lb⋅ft (420 N⋅m) of torque. It comes with a new 10-speed automatic transmission and either rear- or all-wheel drive. Its maximum tow rating is 5,300 lb (2,404 kg). An optional twin-turbocharged 3.0-liter EcoBoost V-6 makes 365 hp (272 kW) and 380 lb⋅ft (515 N⋅m) of torque, while the ST with the same engine makes 400 hp (298 kW) and 415 lb⋅ft (563 N⋅m) of torque. It also mates with a 10-speed automatic and sees an increase in towing capacity, to 5,600 lb (2,540 kg). An Explorer Hybrid will also be available in the US with an initially detuned 3.3-liter V6 producing a combined 318 hp (237 kW). but in a possible future full tuned version could make over 500 hp (373 kW) combined output being the possible most powerful non turbo V6 engine ever.

The European version will have a fully tuned 350 hp (261 kW) 3.0-liter V6 petrol engine and a 100 hp (75 kW) electric motor with a combined output of 450 hp (336 kW) and 600 lb⋅ft (813 N⋅m). It will have a fuel consumption of 3.4 L/100 km (69.2 mpg‑US) and can tow 2,500 kg (5,512 lb) The 2020 Explorer comes in four trim levels: XLT, Limited, ST, and Platinum. The base Explorer will be sold mainly to fleet buyers, and will not be available for retail sale. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!