TPMS Reset: Ford Edge 2007-2014 Tire Pressure Sensor
Ford Edge 2007-2014 Tire Pressure Monitoring System TPMS Reset
Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Ford Edge for the year 2007, 2008, 2010, 2011 and 2014.
A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.
Relearn Procedure for Models WITH STANDARD IGNITION
1. Inflate all tires to pressure listed on vehicle placard.
2. Leave the driver’s door open during the relearn procedure.
3. Turn ignition to OFF position and press and release brake pedal.
4. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
5. Press and release brake pedal.
6. Turn ignition to OFF position.
7. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
8. Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
9. Starting with the LF tire, use your TPMS Toolto scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
10. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
11. Turn ignition to the OFF position.
Relearn Procedure for Models WITH PUSH-BUTTON IGNITION
NOTE: some models require the ignition button to be pressed twice, without pressing the brake, to enter the RUN mode (Ignition ON/Engine OFF). If this is the case, then modify steps 4 and 6 as noted.
1. Inflate all tires to pressure listed on vehicle placard.
2. Leave the driver’s door open during the relearn procedure.
3. With the vehicle OFF, press and release the brake pedal.
4. Press the IGNITION BUTTON 5 times (NOTE: 8 times if 2x-to-RUN).
5. Press and release the brake pedal.
6. Press the IGNITION BUTTON 6 times (NOTE: 9 times if 2x-to-RUN). Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
7. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once after each sensor has been recognized.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
9. Press the IGNITION BUTTON 1 time to turn the vehicle OFF.
About Ford Edge
The Ford Edge is a range of crossover SUVs manufactured by the Ford Motor Company. Introduced for the 2007 model year, the Edge is the first mid-size CUV marketed by Ford in North America; the model line is currently in its second generation. Deriving its name from a trim package of the Ford Ranger, the Ford Edge is slotted between the Ford Escape and the Ford Explorer within the Ford product line.
Sharing its underpinnings with the Ford Fusion sedan, Ford has also produced the model line as the Lincoln MKX (since 2019, the Lincoln Nautilus); the first generation was also produced as the Mazda CX-9. The second generation is also marketed by Ford of Europe, slotted between the Kuga (Escape) and the Explorer PHEV.
All production of the Ford Edge is sourced from Ford of Canada at Oakville Assembly (Oakville, Ontario) alongside the Nautilus. (Source Wiki)
