TPMS Reset: Dodge Charger 2006-2019 Tire Pressure Sensor

TPMS Reset-Dodge Charger 2006-2019 Tire Pressure Sensor

Dodge Charger 2006-2019 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Dodge Charger for the year 2006, 2007, 2008, 2009, 2010 and 2019.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to pressure listed on the placard.

2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.

3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.

4. During the 20 minutes, scan each sensor.

5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.

Sensor Relearn Procedure with a Scan Tool (If Available):

1. Inflate all tires to pressure listed on the placard.

2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.

3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).

4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).

5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.

6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.

7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.

8. With the ignition still in the ON position, re-scan each sensor.

9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.

 

About Dodge Charger

Dodge reintroduced the Charger in 2005 for the 2006 model year in a new form. This generation was available only as a four-door sedan using the Chrysler LX platform The design was intended to be reminiscent of the Chargers of the 1960s and 1970s and the taillights harkened back to that era, as did the new stamped hood and side panels.

This generation was available with V6 and V8 engine options coupled to automatic transmissions, as well as all-wheel drive (AWD).

In its inaugural year, the Dodge Charger was available in SE, SXT, R/T, R/T with Road/Track Performance Group, Police, and Daytona R/T versions. The basic SE model included a 2.7 L V6 engine, 5-speed automatic transmission with “AutoStick” manual shifting feature, 17-inch wheels, air conditioning, all-speed traction control, as well as ABS and electronic stability control, a CD player, tilt and telescoping steering column, power locks/mirrors/windows, and remote keyless entry. Additional features and trims were available including the Charger R/T with a 5.7 L Hemi V8 mated to a 5-speed automatic transmission. A multiple-displacement system that allows it to save fuel by running on only four cylinders when cruising was also featured in the V8. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *