TPMS Reset: Cadillac SRX 2016 Tire Pressure Sensor

Cadillac SRX 2016 Tire Pressure Monitoring System TPMS Reset
Quick to follow steps on how to reset the TPMS service maintenance indicator warning light on Cadillac SRX for the year 2016.
A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.
Procedure using a TPMS tool
Sensor Relearn Procedure with Steering Wheel Buttons:
1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.
Sensor Relearn Procedure not equipped with Steering Wheel Buttons:
1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn ignition to the OFF position.
Procedure using another Properly Formatted TPMS Scan Tool
Sensor Relearn Procedure with Steering Wheel Buttons:
1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.
Sensor Relearn Procedure not equipped with Steering Wheel Buttons:
1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.
About Cadillac SRX
The second generation SRX followed the Provoq concept vehicle, using a variation of the Epsilon II platform. The V8 was no longer available. Production began in 2009 as a 2010 model, with an initial $34,155 MSRP.
The SRX debuted in January 2009 with the choice of a 3.0 liter V6 with direct injection derived from the 3.6 liter unit in the Cadillac CTS, or a 2.8 liter turbocharged V6.
2016 was the last model year for the SRX as Cadillac replaced it by the XT5 in the spring of 2016 as a 2017 model. (Source Wiki)