TPMS Reset: Cadillac SRX 2014 – 2015 Tire Pressure Sensor

TPMS Reset-Cadillac SRX 2014 – 2015 Tire Pressure Sensor

Cadillac SRX 2014-2015 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset the TPMS service maintenance indicator warning light on Cadillac SRX for the year 2014 and 2015.

A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS tool

Sensor Relearn Procedure:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Scroll to the Tire Pressures screen, using the steering wheel buttons, then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Sensor Relearn Procedure (select models):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for 5 seconds, then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has receiveda signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn the ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Scroll to the Tire Pressures screen, using the steering wheel buttons, then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Sensor Relearn Procedure (select models):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for 5 seconds, then press the button again to confirm.
5. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

About Cadillac SRX

For the 2014 model year, 18-inch chrome wheels were added to the Luxury trim and the Driver Awareness package received Intellibeam headlights. Exterior colors Graphite Metallic, Terra Mocha Metallic, and Sapphire Blue Metallic were added caramel and ebony interior accents became options. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *