counter create hit

Oil Reset Procedure: Toyota Sequoia 2005-2015

Oil Reset Procedure Toyota Sequoia 2005-2015

Oil Reset Procedure for Toyota Sequoia 2005-2015

 

 

 

Simple to follow oil reset procedure for Toyota Sequoia for the year 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015.

 

 

Oil Reset Procedure for Toyota Sequoia for the year 2005 through 2008

1. Turn ignition to the “RUN” position.

2. Make sure odometer is displayed and turn ignition off.

3. Press and hold trip meter reset knob and turn ignition to the “RUN” position.

4. Hold knob for at least 5 seconds until “000000” is displayed and light turns off.

5. Turn ignition off.

 

Oil Reset Procedure for Toyota Sequoia for the year 2008

1. Turn ignition to the “RUN” position.

2. Make sure odometer is displayed and turn ignition off.

3. Press and hold trip meter reset knob and turn ignition to the “RUN” position.

4. Hold knob for at least 5 seconds until “000000” is displayed and light turns off.

5. Turn ignition off.

 

Oil Reset Procedure for Toyota Sequoia for the year 2009

1. Turn ignition to the “RUN” position.

2. Make sure trip meter “A” is displayed and turn ignition off.

3. Press and hold the trip meter reset knob and turn the ignition to the “RUN” position.

4. Continue to hold the knob until “000000” is displayed, or “MAINT REQD RESET MODE COMPLETE” is displayed on multiinformation display vehicles.

5. Turn ignition off.

 

Oil Reset Procedure for Toyota Sequoia for the year 2010 through 2012

1. Turn ignition to the “RUN” position.

2. Make sure trip meter “A” is displayed and turn ignition off.

3. Press and hold the trip meter reset knob and turn the ignition to the “RUN” position.

4. Continue to hold the knob until “000000” is displayed, or “MAINT REQD RESET MODE COMPLETE” is displayed on multiinformation display vehicles.

5. Turn ignition off.

 

Oil Reset Procedure for Toyota Sequoia for the year 2010 through 2015

1. Turn ignition to the “RUN” position.

2. Make sure trip meter “A” is displayed and turn ignition off.

3. Press and hold the trip meter reset knob and turn the ignition to the “RUN” position.

4. Continue to hold the knob until “000000” is displayed, or “MAINT REQD RESET MODE COMPLETE” is displayed on multiinformation display vehicles.

5. Turn ignition off.

 

 

Additional Toyota Sequoia Oil Reset Light Procedure Information

 

ModelYearEngine
Size (liters)
ViscosityCapacity
w/filter
(quarts)
Sequoia2005-20084.75W-306.6
Sequoia20085.70W-207.4
Sequoia20094.75W-306.6
Sequoia20095.70W-207.4
Sequoia2010-20124.60W-207.9
Sequoia2010-20155.70W-207.9

 

 

 

 

 

About Toyota Sequoia

The Toyota Sequoia is a full-size SUV produced by Toyota primarily for the North American market beginning with the 2001 model year. It is based on the Tundra pickup truck. It is the second largest SUV produced by Toyota after the Japan-only, military-focused Mega Cruiser.

The Sequoia is the first vehicle from a Japanese marque in the popular mainstream full-sized SUV class in North America, and initial planning done by first-generation Sequoia chief engineer Kaoru Hosokawa aimed the Sequoia directly at the Ford Expedition, Chevrolet Tahoe, and Nissan Armada.

Until the 2021 model year, the Sequoia was positioned in the Toyota SUV lineup in North America between the mid-size 4Runner and the premium Land Cruiser. With the discontinuation of Land Cruiser sales in North America beginning with the 2022 model year, the Sequoia became Toyota’s flagship SUV in the North American lineup.

The Sequoia will be available in the United States, Canada, and Costa Rica by 2021. It is only available in left-hand drive.

The Sequoia 4WD had the lowest overall driver death rate in its class in 2015, according to the Insurance Institute for Highway Safety (IIHS), with 0 deaths per million registered vehicle years. (Source: Wiki)

error: Content is protected !!