Oil Reset Procedure: Saturn Relay 2005-2007
Oil Reset Procedure for Saturn Relay 2005-2007
Simple to follow oil reset procedure for Saturn Relay for the year 2005, 2006 through 2007.
Oil Reset Procedure for Saturn Relay for the year 2005 through 2006
1. Turn ignition to the “RUN” position.
2. Press the “SET/RESET” button until “OIL” is displayed on the DIC.
3. Press and hold the “SET/RESET” button for 5 seconds and “100” will be displayed.
4. Turn ignition off.
Oil Reset Procedure for Saturn Relay for the year 2006 through 2007
1. Turn ignition to the “RUN” position.
2. Press the “SET/RESET” button until “OIL” is displayed on the DIC.
3. Press and hold the “SET/RESET” button for 5 seconds and “100” will be displayed.
4. Turn ignition off.
Additional Saturn Relay Oil Reset Light Procedure Information
| Model | Year | Engine Size (liters) | Viscosity | Capacity w/filter (quarts) |
| Relay | 2005-2006 | 3.5 | 5W-30 | 4 |
| Relay | 2006-2007 | 3.9 | 5W-30 | 4 |
About Saturn Relay
General Motors manufactured the Saturn Relay minivan. It was introduced for the 2005 model year and was built in Doraville, Georgia, alongside badge engineered variants such as the Buick Terraza, Chevrolet Uplander, and Pontiac Montana SV6. The 3.5 L V6 was dropped for 2007, leaving the 3.9 L as the base engine. As a result, the optional AWD system was dropped because it couldn’t handle the torque of the 3.9 L engine. In addition, the Relay received an optional flex-fuel engine in 2007, but only for fleet applications. In Insurance Institute for Highway Safety (IIHS) crash tests, the Relay received three “Good” ratings (the highest possible) and two “acceptable” ratings (the second highest possible). The Relay gets 19 miles per gallon (12 L/100 km; 23 mpgimp) in the city and 25 miles per gallon (9.4 L/100 km; 30 mpgimp) on the highway. (Source: Wiki)
