Oil Reset Procedure: RAM 2500 Pickup 2015

Oil Reset Procedure for RAM 2500 Pickup 2015

 

 

 

Simple to follow oil reset procedure for RAM 2500 Pickup for the year 2015.

 

 

 

Oil Reset Procedure for RAM 2500 Pickup for the year 2015

With DID:

1. Turn ignition to the “RUN” position.

2. Press the down arrow to scroll to “VEHICLE INFO”.

3. Press the right arrow to access “OIL LIFE”.

4. Press and hold the right arrow button for one second to access “OIL LIFE RESET”.

5. Press the down button to highlight “YES” and press right for reset.

6. Press the up arrow to exit the DID screen.

7. Turn ignition off.

Without DID:

1. Turn ignition to the “RUN” position. Press the down arrow to scroll to “VEHICLE INFO”.

2. Press the right arrow to access “OIL LIFE”.

3. Press the down arrow to select “RESET” and then press the right arrow to rest to 100%.

4. Press the up button to exit EVIC screen.

5. Turn ignition off.

Additional RAM 2500 Pickup Oil Reset Light Procedure Information

About RAM 2500 Pickup

The 3.9 L V6, 5.2 L V8, 5.9 L V8, and 5.9 L I6 Cummins turbo diesel engines were carried over from the first-generation Ram. A new 8.0 L V10 engine was added to the lineup as an alternative for those who wanted superior pulling power but did not want a diesel. The new V10 and Cummins turbodiesel were only available in 2500 and higher model designations. The 1500 half-ton, 2500 three-quarter-ton, and 3500 dual-rear-wheel one-ton models were now available in both 2- and 4-wheel drive.

The first-generation Ram’s 3.9 L V6, 5.2 L V8, 5.9 L V8, and 5.9 L I6 Cummins turbo diesel engines were retained. For those who wanted superior pulling power but did not want a diesel, a new 8.0 L V10 engine was added to the lineup. The new V10 and Cummins turbodiesel were only available in model designations 2500 and higher. The 1500 half-ton, 2500 three-quarter-ton, and 3500 dual-rear-wheel one-ton models were now available in both 2- and 4-wheel drive configurations. (Source: Wiki)