counter create hit

Oil Reset Procedure: Ford Explorer Sport Trac 1999-2010

0
Oil Reset Procedure Ford Explorer Sport Trac 1999-2010

Oil Reset Procedure for Ford Explorer Sport Trac 1999-2010

 

 

Easy to follow oil reset procedure for Ford Expedition Sport Trac for the year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 and 2010.

 

 

Ford Explorer Sport Trac oil reset procedure for the year 1999 through 2001.

1. Turn the ignition to run, one position before starting engine.

2. Press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display OIL LIFE RESET TO 100%.

3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Ford Explorer Sport Trac oil reset procedure for the year 2001.

1. Turn ignition to the “RUN” position.

2. Press and hold “OIL CHANGE RESET” for 5 seconds.

3. Countdown from 5 will take place and then “OIL LIFE RESET TO 100%” will be displayed.

4. Turn ignition off.

Ford Explorer Sport Trac oil reset procedure for the year 2002 through 2003.

1. Turn ignition to the “RUN” position.

2. Press the “SETUP” button to access the system check menu.

3. Press the “RESET” button and “OIL LIFE % HOLD RESET NEW” will be displayed.

4. Press and hold the “RESET” button for 2 seconds, “IF NEW OIL HOLD RESET” will be displayed.

5. Press and hold the reset button again, “OIL LIFE SET TO 100%” will be displayed. Oil life is now reset.

6. Turn ignition off.

Ford Explorer Sport Trac oil reset procedure for the year 2004 through 2005.

1. Turn ignition to the “RUN” position.

2. Select “PRESS RESET AT OIL CHANGE” from the “SETUP” menu.

3. Press “RESET” button. Turn ignition off.

Ford Explorer Sport Trac oil reset procedure for the year 2007.

1. Turn ignition to the “RUN” position.

2. Enter “SYSTEM CHECK” menu and “OIL % OIL LIFE OK” will be displayed.

3. Press “RESET” button, “HOLD RESET IF NEW OIL” will be displayed.

4. Press and hold the “RESET” button for more than 2 seconds. “OIL CHANGE SET TO 100%” will be displayed.

5. Turn ignition off.

Ford Explorer Sport Trac oil reset procedure for the year 2008 through 2010.

1. Turn ignition to the “RUN” position.

2. Press and hold the “SELECT/RESET” button for 2 seconds.

3. Press the “SELECT/RESET” button until “OIL LIFE RESET” and “START VALUE” are displayed.

4. Press and hold the “SELECT/RESET” button for more than 2 seconds. “OIL CHANGE SET TO 100%” will be displayed.

5. Turn ignition off.

 

 

 

About Ford Explorer Sport Trac

The Ford Explorer Sport Trac (also known as the Ford Sport Trac) is a pickup truck produced and marketed by Ford Motor Company in North America. The Sport Trac was Ford’s first mid-sized pickup truck, and it was available from 2001 to 2010. (skipping the 2006 model year). The Sport Trac competed primarily against crew-cab variants of the Chevrolet Colorado/GMC Canyon, Dodge Dakota, Nissan Frontier, and Toyota Tacoma, as it was sized between the Ranger (whose crew cab variants were sold outside of North America) and the F-150.

The Ford Explorer Sport Trac shared its chassis and much of its body with the Ford Explorer SUV over two generations (with the pickup truck bed designed specifically for the model line). The Louisville Assembly Plant in Louisville, Kentucky was responsible for all production (taking the place of the Ford Ranger).

The Sport Trac was phased out of the model line as Ford developed the fifth-generation Ford Explorer SUV for the 2011 model year, with production ending in October 2010. The fourth-generation Ford Ranger, which is roughly the same size as the Sport Trac, serves the same market function in its SuperCrew four-door crew cab configuration.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!