counter create hit

KeyFob RKE Programming Procedure: Toyota Scion TC 2005-2010

KeyFob RKE Programming Procedure-Toyota Scion TC 2005-2010

Toyota Scion TC 2005-2010 KeyFob Remote Keyless Entry Programming Procedure



How to Program Toyota Scion TC KeyFob Remote Keyless Entry for the year 2005 and 2010.



Programming Procedure

  1. First, close all doors
  2. Insert master Toyota key in and out of ignition cylinder 4 times. On the 5th time leave the master key in the ignition cylinder
  3. Open and close driver’s side door 6 times
  4. Remove master key from ignition cylinder.
  5. Verify that security light on the information display is solid, indicating that the car successfully entered programming mode
  6. Insert new chip key
  7. Watch security light blinking for about 60 seconds
  8. When security light goes out, your new key is successfully programmed
  9. Remove new key from the ignition cylinder
  10. And finally, verify that your new key is able to deactivate anti-theft system: security indicator light on the information display should disappear when inserting properly programmed key into ignition cylinder
  11. If it didn’t work, repeat the same steps from the beginning


About Toyota Scion TC

The replacement model debuted at the April 2010 New York Auto Show, and appeared in U.S. dealerships in October 2010. It received a performance bump; with the new engine being carried over from the Toyota Camry being a 2.5 liter I4 2AR-FE engine producing 180 hp (130 kW) and 174 lb⋅ft (236 N⋅m). Like the first generation, the chassis remained a variant of the Toyota Avensis, the model using the third generation chassis. Visually, the second generation is a toned-down variant of the Scion Fuse concept, featuring a similar rear quarter-panel window line to the concept but with xB-styled blacked-out A-pillars. The headlights, taillights and grille received a makeover to make the car seem more muscular and angular. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!