TPMS Reset: Pontiac Grand Prix 2007-2008 Tire Pressure Sensor

Pontiac Grand Prix 2007-2008 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Pontiac Grand Prix for the year 2007 and 2008.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool

Relearn Procedure for Models Equipped with Keyless Entry:

1. Set the parking brake.
2. Inflate all tires to the pressure listed on the placard.
3. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
4. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds. The horn sounds twice to signal the receiver is in relearn mode and TIRE LEARNING ACTIVE message displays on the DIC
5. Select the vehicle make, model and model year in your TPMS Tool.
6. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button
4. Select the vehicle make, model and model year in your TPMS Tool.
5. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Select the vehicle make, model and model year in your TPMS Tool.
5. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Relearn Procedure for Models Equipped with Keyless Entry:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
3. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position

About Pontiac Grand Prix

2008 was the Pontiac Grand Prix’s last year as the sedan. For 2008, Pontiac did not offer the GT trim, but continued to offer both a base and GXP trim. The base trim is offered with a 200 hp (150 kW) V6 engine and 16 in (41 cm) wheels. Several new colors were also added for the 2008 model year. The Pontiac Grand Prix was replaced by the G8 for the 2008–2009 model year. Production of the larger G8, however, ended in June 2009. The Pontiac brand was dissolved in 2010 as part of GM’s Chapter 11 reorganization. (Source Wiki)