TPMS Reset: Mazda 6 2005-2013 Tire Pressure Sensor

Mazda 6 2005-2013 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Mazda 6 for the year 2005, 2010, 2011 and 2013.

No special tools are required to perform this procedure, however a properly formatted TPMS scan tool may expedite the relearn process.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to the pressure listed on the placard.

2. Turn the ignition to the ON position, then the OFF position.

3. With the ignition OFF, wait 15 minutes.

4. Drive the vehicle for at least 10 minutes at a speed of 30 MPH or more for the system to learn the new sensor IDs.

Sensor Relearn procedure with a Scan Tool:

1. Inflate all tires to the pressure listed on the placard.

2. Starting with the LF tire, use a properly formatted scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).

3. Turn ignition to the ON position.

4. Connect the scan tool to the vehicle’s OBDII Port and upload the sensor IDs.

5. Turn the ignition to the OFF position.

6. Drive the vehicle above 30 MPH, for at least 5 minutes, and monitor the low tire pressure monitor to ensure it does not blink.

About Mazda 6

The Grand Touring model with Technology Package and Advanced Package added features such as radar cruise control, forward obstruction warning, lane departure warning, and automatic high beam control. For 2016, the Grand Touring introduced LED Headlights in lieu of bi-xenon HID headlights, new LED daytime running lights, and LED fog lights. The 2016 Grand Touring with Technology Package also introduced Smart Brake Support (SBS) which is different than Smart City Brake Support (SCBS) which was introduced in earlier Mazda models such as the CX-5. Although the two systems are similarly named, they perform different functions at different speed ranges.(Source Wiki)