counter create hit

TPMS Reset: Mazda Tribute 2006-2011 Tire Pressure Sensor

0
TPMS Reset-Mazda Tribute 2006-2011 Tire Pressure Sensor

Mazda Tribute 2006-2011 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Mazda Tribute for the year 2006, 2008, 2009, 2010 and 2011.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

 

Procedure using a TPMS Tool

Sensor Relearn Procedure:

1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to the OFF position and press and release brake pedal.
3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position. The horn will sound once, and the TPMS telltale will blink, once relearn mode is initiated.
7. Select the vehicle make, model and model year in your TPMS Tool.
8. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF,RF, RR LR (and full size spare if equipped). The horn will sound after each sensor is activated.
9. After relearning the LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle in not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the relearn procedure must be repeated.
10. Turn the ignition to the OFF position

 

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure:

1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to the OFF position and press and release brake pedal.
3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position. The horn will sound once, and the TPMS telltale will blink, once relearn mode is initiated.
7. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR LR (and full size spare if equipped). The horn will sound after each sensor is activated.
8. After relearning the LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle in not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the relearn procedure must be repeated.
9. Turn the ignition to the OFF position

 

 

About Mazda Tribute

The Mazda Tribute (Japanese: マツダ・トリビュート, Matsuda Toribyūto) (Code J14) is a compact SUV made by Japanese automaker Mazda from 2000 to 2011. It was jointly developed with Ford Motor Company and based on the front-wheel drive Mazda 626 platform, which was in turn the basis for the similar Ford Escape on the CD2 platform. The Tribute was priced below the Ford Escape and Mercury Mariner in Ford’s CD2 SUV lineup. (Source Wiki)

 

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!