TPMS Reset-Lincoln Nautilus 2019 Tire Pressure Sensor

Lincoln Nautilus 2019 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Lincoln Nautilus 2019.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

 

Relearn Procedure for Models WITH STANDARD IGNITION

1. Inflate all tires to pressure listed on vehicle placard.
2. Leave the driver’s door open during the relearn procedure.
3. Turn ignition to OFF position and press and release brake pedal.
4. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
5. Press and release brake pedal.
6. Turn ignition to OFF position.
7. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
8. Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
9. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
10. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
11. Turn ignition to the OFF position

 

Relearn Procedure for Models WITH PUSH-BUTTON IGNITION

NOTE: some models require the ignition button to be pressed twice, without pressing the brake, to enter the RUN mode (Ignition ON/Engine OFF). If this is the case, then modify steps 4 and 6 as noted.

1. Inflate all tires to pressure listed on vehicle placard.
2. Leave the driver’s door open during the relearn procedure.
3. With the vehicle OFF, press and release the brake pedal.
4. Press the IGNITION BUTTON 5 times (NOTE: 8 times if 2x-to-RUN).
5. Press and release the brake pedal.
6. Press the IGNITION BUTTON 6 times (NOTE: 9 times if 2x-to-RUN).

 

Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.

 

7. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will
sound once after each sensor has been recognized.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
9. Press the IGNITION BUTTON 1 time to turn the vehicle OFF.

About Lincoln MKZ

The Lincoln MKX is a mid-size luxury SUV marketed and sold by the Lincoln brand of Ford Motor Company. As Lincoln is phasing out its use of “MK” model names, the MKX adopted the Lincoln Nautilus nameplate as part of a mid-cycle update for the 2019 model year. In production since 2007, the MKX (“X” stands for “crossover”) is the first crossover SUV offered by the Lincoln brand; it is currently in its second generation. Initially the smallest Lincoln SUV, it is now slotted between the Lincoln Corsair and the Lincoln Aviator. The Lincoln counterpart of the Ford Edge CUV across both generations, the MKX has been the best-selling Lincoln model line since 2016. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *