TPMS Reset: Isuzu i-370 2007-2008 Tire Pressure Sensor
Isuzu i-370 2007-2008 Tire Pressure Monitoring System TPMS Reset
Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Isuzu i-370 for the year 2007 and 2008.
A TPMS Tool , or another properly formatted TPMS scan tool, is required to perform this procedure.
Procedure using a TPMS Tool
Sensor Relearn Procedure:
1. Inflate all tires to pressure listed on tire placard.
2. Apply the parking brake.
3. Turn ignition to the ON position with the engine OFF (not the ACC position).
4. Turn the headlight switch from OFF to PARKING LAMPS 4 times within 3 seconds. A double horn chirp will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
5. If the headlight switch does not enable TPMS learn mode, then press the vehicle info button, on the DIC (if equipped) until “TPMS RELEARN” is displayed. Then press the checkmark button.
6. Select the vehicle make, model and model year in your TPMS Tool .
7. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR LR (and full size spare if equipped).
8. Turn the ignition to the OFF position
Procedure using another Properly Formatted TPMS Scan Tool
Sensor Relearn Procedure:
1. Inflate all tires to pressure listed on tire placard.
2. Apply the parking brake.
3. Turn ignition to the ON position with the engine OFF (not the ACC position).
4. Turn the headlight switch from OFF to PARKING LAMPS 4 times within 3 seconds. A double horn chirp will sound and the TPMS telltale will begin blinking to indicate the learn mode is enabled.
5. If the headlight switch does not enable TPMS learn mode, then press the vehicle info button, on the DIC (if equipped) until “TPMS RELEARN” is displayed. Then press the checkmark button.
6. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR LR (and full size spare if equipped).
7. Turn the ignition to the OFF position.
About Isuzu i-370
The Isuzu i-series mid-size pickup truck line was manufactured from 2005 to 2008. Launched at the 2005 New York International Auto Show, for the 2006 model year, the i-series replaced the Isuzu Hombre, which had been out of production since 2000. Like the Hombre, which was based on the compact Chevrolet S-10 / GMC Sonoma, the i-series was based on the Chevrolet Colorado / GMC Canyon. Two models were offered at launch: the i-280, powered by the 2.8 L I4 engine, and the i-370, powered by the 3.7 L I5 engine. The i-280 was available only with an extended cab, while the i-370 could be had with either an extended cab or crew cab. The i-280 was replaced by the i-290 for 2007 with the introduction of a 2.9 L engine.
The sales for the i-series were poor, with just 1,377 sold from the start of production through February 2006 according to Automotive News. As part of Isuzu’s withdrawal from the United States market after the 2008 model year, the i-series was discontinued. (Source Wiki)
