TPMS Reset-Hummer H3T 2009-2010 Tire Pressure Sensor

Hummer H3T 2009-2010 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Hummer H3T for the year 2009 and 2010.

A TPMS Tool , or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool

1. Set the parking brake.

2. Inflate all tires to the pressure listed on the placard.

3. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).

4. Turn the headlight switch from OFF to parking lamps 4 times within five seconds. The horn sounds twice to signal the receiver is in relearn mode.

5. Select the vehicle make, model and model year in your TPMS Tool .

6. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor.

7. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.

2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.

3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button

4. Select the vehicle make, model and model year in your TPMS Tool .

5. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor.

6. Turn the ignition to the OFF position.

 

The Hummer H3T

The Hummer H3T is a mid-size pickup truck that was available during the 2009 and 2010 model years.

The vehicle was originally developed as a regular cab (two-door) concept pickup truck in 2003, that was shown at the 2004 Los Angeles Auto Show. The five-passenger four-door crew-cab production version appeared at the 2008 Chicago Auto Show. The H3T featured a 5-foot bed with built-in storage boxes and came in standard H3T, H3T Adventure, H3T Luxury, and H3T Alpha (with cloth or leather trim) trim packages.

A road test by Motor Trend reported the 2009 truck “crawled up rock steps, ran through sand washes, and navigated steep ledges with confidence and capability to spare.” They described its turning radius “uncomfortably wide” and said “at highway cruising it would’ve been nice to have a faster, firmer feel. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *