TPMS Reset-Hummer H3 2006-2010 Tire Pressure Sensor

Hummer H3 2006-2010 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Hummer H3 for the year 2006 and 2010.

A TPMS Tool , or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool

1. Set the parking brake.

2. Inflate all tires to the pressure listed on the placard.

3. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).

4. Turn the headlight switch from OFF to parking lamps 4 times within five seconds. The horn sounds twice to signal the receiver is in relearn mode.

5. Select the vehicle make, model and model year in your TPMS Tool .

6. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a
signal from each sensor.

7. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.

2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.

3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button

4. Select the vehicle make, model and model year in your TPMS Tool .

5. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor.

6. Turn the ignition to the OFF position.

 

About Hummer H3

The Hummer H3 is an off-road vehicle that was produced from 2005 to 2010 by General Motors. The smallest model of the Hummer lineup, it was offered as a 5-door SUV or a 4-door pickup truck known as the H3T. Unlike the larger H1 and H2 models, the H3 was not developed by AM General. It was introduced for the 2006 model year, based on a modified GMT355 that underpinned the Chevrolet Colorado/GMC Canyon compact pickup trucks that were also built at GM’s Shreveport Operations in Shreveport, Louisiana and the Port Elizabeth plant in South Africa. While mechanically related to the Colorado and Canyon, GM claims they share only 10% of their components, with the chassis modified and reinforced for heavy off-road duties. (Source Wiki)

 

Leave a Reply

Your email address will not be published. Required fields are marked *