TPMS Reset: GMC Sierra 2015-2019 Tire Pressure Sensor

GMC Sierra 2015-2019 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on GMC Sierra for the year 2015, 2016, 2017 and 2019.

A TPMS Tool , or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS Tool .
5. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a
signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS Tool .
6. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

About GMC Sierra

The Silverado nameplate made its debut for the 1975 model year, becoming the top trim level on all Chevrolet C/K trucks, slotted above Custom Deluxe, Scottsdale, and Cheyenne. At the same time, GMC C/K trucks used variations of the Sierra name (Sierra, Sierra Classic, Sierra Grande, and High Sierra). Today, Chevrolet still uses the CK and the CC in their current model codes.

For the 1988 GMT400 model architecture, Chevrolet retained the C/K model nomenclature, with GMC branding its full-size line as Sierras. While sharing chassis and bodies, the model chronology of the Silverado and Sierra are different, with five generations of the Sierra and four of the Silverado.

In 2018, at the NTEA Work Truck Show in Indianapolis, IN, Chevrolet unveiled the first medium-duty Silverado, expanding the model line to a 4500, 5500, and 6500 chassis cab. Largely the successor to the 2003-2010 GMT560 chassis, the medium-duty Silverado is exclusive to Chevrolet, with no plans for an equivalent GMC version. (Source Wiki)