counter create hit

TPMS Reset: GMC Yukon 2008-2016 Tire Pressure Sensor

0
TPMS Reset-GMC Yukon 2008-2016 Tire Pressure Sensor

GMC Yukon 2008-2016 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on GMC Yukon for the year 2008, 2015 and 2016.

A TPMS Tool , or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS Tool .
5. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS Tool .
6. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

About GMC Yukon

The overhauled, K2XX-platformed GMC Yukon has been a strong seller for General Motors. In calendar year 2014, the full-size SUV family was responsible for 71,321 sales in the United States, a 20 percent increase compared to 2013. GMC is keeping the lineup fresh for the 2016 model year, giving the range a few notable updates and changes.

To start, the 2016 GMC Yukon does away with the Crystal Red Tintcoat and White Diamond Tricoat colors. In their place are the new, extra-cost Crimson Red Tintcoat and White Frost Tricoat hues.

Rounding out the new features list is the addition of Lane Keep Assist (which replaces Lane Departure Warning) and IntelliBeam headlamps that automatically enable or disable the high beams. What’s more, the SD card slot is removed from the inside center console, the capless fuel filler is now standard across all trim levels, and the power handsfree lift gate is now included on the Yukon SLT trim level. (Source GMA Authority)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!