counter create hit

TPMS Reset: Ford Focus 2017 Tire Pressure Sensor

0
TPMS Reset-Ford Focus 2017 Tire Pressure Sensor

Ford Focus 2017 (RS Snap In Valve) Tire Pressure Monitoring System TPMS Reset

Quick to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Ford Focus for the year 2017.

A relearn magnet, or another properly formatted TPMS scan tool, is required to perform this procedure.

Relearn Procedure

1. Inflate all tires to pressure listed on the placard.

2. Make sure the vehicle has been in park for at least 2 minutes before proceeding.

3. Turn ignition to the ON/RUN position with the engine OFF.

4. Press the RESET button on the Driver Information Center (DIC) to clear any warning messages displayed on the Instrument Panel Cluster (IPC).

5. Press and release the OPTIONS button, on the DIC, until the IPC display is blank.

6. Press and hold the RESET button, on the DIC, for three seconds.

7. Press and release the OPTIONS button again until the message TIRE TRAINING appears on the IPC.

8. Press and release the RESET button until the message LEARN L FRONT TIRE is displayed.

9. Starting at left front tire, place the relearn magnet over valve stem until the horn sounds.

10. After the horn chirp has sounded, proceed as in step 9 for the next three sensors in the following order: RF, RR, and LR. The horn will sound after each activation. After activating the LR sensor, the horn will sound twice signifying the relearn is complete.

11. Turn the ignition switch to OFF and exit the relearn mode.

 

About Ford Focus

The Ford Focus is a compact car (C-segment in Europe) manufactured by the Ford Motor Company and created under Alexander Trotman’s Ford 2000 plan, which aimed to globalize model development and sell one compact vehicle worldwide. The original Focus was primarily designed by Ford of Europe’s German and British teams.

The Focus was released in July 1998 in Europe, succeeding the Ford Escort, and replaced the Mazda Familia-derived Ford Laser in Asia and Oceania along with the Laser-based North American Escort. Wayne Stamping & Assembly started producing the Focus for North America with sales beginning in 1999. The last North American-produced Focus rolled off the line at the Michigan Assembly Plant on May 4, 2018. Production of the fourth generation Focus began in 2018 in Germany and in China. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!