counter create hit

TPMS Reset: Chrysler Sebring 2007-2011 Tire Pressure Sensor

0
TPMS Reset-Chrysler Sebring 2007-2011 Tire Pressure Sensor

Chrysler Sebring 2007-2011 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chrysler Sebring for the year 2007, 2008, 2009, 2010 and 2011.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to pressure listed on the placard.

2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.

3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.

4. During the 20 minutes, scan each sensor.

5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.

Sensor Relearn Procedure with a Scan Tool (If Available):

1. Inflate all tires to pressure listed on the placard.

2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.

3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).

4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).

5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.

6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.

7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.

8. With the ignition still in the ON position, re-scan each sensor.

9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.

About Chrysler Sebring

The Sebring was replaced with a new model based on the JS platform for the 2007 model year. The third-generation Sebring was assembled in Sterling Heights, Michigan, containing over 82% of parts sourced in North America. Since no 2007 convertible was offered, the 2006 Sebring convertible was left to fill the void, remaining in showrooms and on the company’s website until the 2008 model’s release. The third-generation Sebring borrowed many styling cues from the 2003 Chrysler Airflite concept. It also has several Chrysler-signature styling cues, several of which were borrowed from the Chrysler Crossfire. The Sebring sedan and convertible were also sold in right-hand drive through Chrysler’s UK and Ireland dealer network.

Chrysler offered three engines for the 2007 Sebring; the 2,360 cc (2.36 L; 144 cu in) GEMA I4, the 2,736 cc (2.736 L; 167.0 cu in) EER V6, and the 3,518 cc (3.518 L; 214.7 cu in) EGF V6. The 3.5 L V6 is coupled to Chrysler’s first ever six-speed automatic transmission, which employs Autostick technology, and the 2.7 L V6 is capable of running on cleaner-burning E85. Export vehicles will be offered with a 2.0 L turbocharged PDTDI (pumpe düse) diesel made by Volkswagen and the 2.0 L GEMA engine. The 3.5 L V6 sedan is available with all-wheel drive as an extra cost option for 2008 only. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!