Cadillac ELR 2014-2016 Tire Pressure Monitoring System TPMS Reset
Simple to follow procedure on how to reset the TPMS service maintenance indicator warning light on Cadillac ELR from 2014, 2015 and 2016.
A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.
1. Set the parking brake.
2. Turn ignition to the ON/RUN position (engine running).
3. Using the Driver Information Controls (touchpad), on the right side of the steering wheel, select SETTINGS, then DISPLAY OPTIONS, then TIRE PRESSURE to turn on the tire pressure info page.
4. Exit the SETTINGS menu and scroll to the TIRE PRESSURES screen, then hold down the SEL/checkmark button until the horn sounds twice.
5. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete. The TIRE LEARNING ACTIVE message, on the DIC display screen, will go off.
6. Turn the ignition to the OFF position.
7. Inflate all tires to the pressure listed on the placard.
About Cadillac ELR
The Cadillac ELR is a two-door, four-passenger luxury plug-in hybrid compact coupé manufactured and marketed by Cadillac for model years (MY) 2014 and 2016 – with a hiatus for MY 2015. Using a retuned version of the Chevrolet Volt’s Voltec EREV drivetrain, the ELR’s lithium-ion battery pack delivers an all-electric range of 37–39 miles (60–63 km) and a top speed of 106 mph (171 km/h).
The ELR derived from Cadillac’s Converj concept, which debuted at the 2009 North American International Auto Show. Scheduled for production and subsequently canceled during GM’s bankruptcy and restructuring, and after a series of on-again, off-again decisions, the ELR was approved for production for MY 2014 with a MSRP at roughly $75,000 — $35,000 higher than the Volt whose basic powertrain it shared. (Source Wiki)