Oil Reset Procedure: Toyota Land Cruiser 2011-2015

Oil Reset Procedure for Toyota Land Cruiser 2011-2015
Simple to follow oil reset procedure for Toyota Land Cruiser for the year 2011, 2012, 2013, 2014 and 2015.
Oil Reset Procedure for Toyota Land Cruiser for the year 2011
1. Press the “ENGINE START STOP” button once.
2. Make sure trip meter “A” is displayed and turn ignition off.
3. While holding the trip meter reset button, press the “ENGINE START STOP” button once.
4. Continue to hold button until “COMPLETE” is displayed.
5. Turn ignition off.
Oil Reset Procedure for Toyota Land Cruiser for the year 2013 through 2015
1. Press the “ENGINE START STOP” button once.
2. Make sure trip meter “A” is displayed and turn ignition off.
3. While holding the trip meter reset button, press the “ENGINE START STOP” button once.
4. Continue to hold button until “COMPLETE” is displayed.
5. Turn ignition off.
Additional Toyota Land Cruiser Oil Reset Light Procedure Information
Model | Year | Engine Size (liters) | Viscosity | Capacity w/filter (quarts) |
Land Cruiser | 2011 | 5.7 | 0W-20 | 7.9 |
Land Cruiser | 2013-2015 | 5.7 | 0W-20 | 7.9 |
About Toyota Land Cruiser
Toyota launched an updated, facelifted version of the J200 Land Cruiser in Japan in August 2015, which was later sold globally. This model debuted in the United States in 2015 for the 2016 model year. The new version features a new 8-speed electronically controlled automatic transmission (ECT-i) mated to the original 5.7 L 3UR-FE V8 petrol engine, larger front disc brakes, and a higher axle ratio (3.30:1 vs 3.90:1 in the previous years). The main exterior highlights of the facelift were updates to the front fascia, grill, headlamps (with daylight running lamps), rear tail lamps, and bumpers. A new multimedia system and interface with larger screens front and back, as well as refreshed interior styling, were among the interior changes. (Source: Wiki)