Oil Reset Procedure: Infiniti Q40, Q50 and Q60 2014-2015
Oil Reset Procedure for Infiniti Q40, Q50 and Q60 2014-2015
Easy to follow oil reset procedure for Infiniti Q40, Q50 and Q60 for the year 2014 and 2015.
Infiniti Q40 oil reset procedure for the year 2014 through 2015
1. Turn ignition on without starting engine (press “START/STOP” button once).
2. Press the “INFO” button and select “MAINTENANCE”.
3. Select “ENGINE OIL” and then select “RESET”.
4. Press the “BACK” button. Select “OIL FILTER” and then select “RESET”.
5. Press the “BACK” button until you return to the main menu.
6. Turn ignition off.
Infiniti Q50 oil reset procedure for the year 2014 through 2015
1. Turn ignition on without starting engine (press “START/STOP” button once).
2. Press the “MENU” button on the lower console display.
3. From the “MENU” screen, select “SETTINGS”.
4. From the “SETTINGS” screen, select “METER”.
5. From the “METER” screen, select “MAINTENANCE”.
6. Select “OIL AND FILTER” to reset or change service intervals.
7. Turn ignition off.
Infiniti Q60 oil reset procedure for the year 2014 through 2015
1. Turn ignition on without starting engine (press “START/STOP” button once).
2. Press the “INFO” button and select “MAINTENANCE”.
3. Select “ENGINE OIL” and then select “RESET”.
4. Press the “BACK” button.
5. Select “OIL FILTER” and then select “RESET”.
6. Press the “BACK” button until you return to the main menu.
7. Turn ignition off.
Or you can also try this procedure for Infiniti Q60, Q50 and Q60 oil reset procedure for the year 2014 through 2015
1. Turn ignition switch to ON position
2. Cycle through the different modes by pressing the ENTER button repeatedly until the “>Setting” mode is displayed
3. Enter the “>Setting” mode by pressing the NEXT button
4. Press the NEXT button until the “>Maintenance” option is highlighted, then select the option with the ENTER button
5. Highlight desired field (>Engine Oil, >Oil Filter, >Tire) by pressing the NEXT button and then press the ENTER button to enter field
6. Highlight the “>Reset” option by pressing the NEXT button twice and then press ENTER
7. Lastly, select the mileage by pressing the NEXT button once and then press ENTER to reset
8. Make sure that the mileage displayed reads “0”
9. Repeat steps 4-7 for >Oil Filter field (and >Tire field if tires were rotated)
About Infiniti Q40, Q50 and Q60
Beginning with the 2014 model year, Infiniti adopted a new naming convention in which all passenger cars are designated by the letter “Q,” while sport-utility model names begin with “QX.” The Infiniti G was supposed to be replaced by the Infiniti Q50, but the G37 was resurrected as the Q40 for the 2015 model year.
Infiniti began using a new naming convention beginning with the 2014 model year. Under this system, the names of all passenger cars are prefixed with the letter “Q,” while the names of all sport-utility vehicle models begin with “QX.” The Infiniti G was supposed to be replaced by the Infiniti Q50; however, for the 2015 model year, the G37 was resurrected as the Q40. The Infiniti Q50 was supposed to replace the Infiniti G.
The Infiniti G Coupe from the fourth generation (V36) served as the foundation for the first generation of the Q60. The previous president of Infiniti, Johan de Nysschen, stated that the company required “a new identity and direction to promote consumer familiarity with our model range as we expand the portfolio.” This resulted in the development of this situation. Beginning in 2014, the letter “Q” would be appended to the registration of all passenger cars, followed by a two-digit number. Those numbers would indicate the vehicle’s position in the Infiniti hierarchy if it were available.
