KeyFob RKE Programming Procedure: Seat Cordoba 2002
Seat Cordoba 2002 KeyFob Remote Keyless Entry Programming Procedure
Re-initializing Procedure
Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst vehicle is out of range and central locking / alarm system becomes inoperative, carry out the following reinitializing procedure.
- Press and release either the “Lock” or “Unlock” button on the key fob.
- Within the next 30 seconds: Using the key manually lock and unlock the driver’s door.
- Key fob is re-initialized.
- Repeat above procedure to re-initialize any remaining key fobs.
- Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.
About Seat Cordoba
The second generation Córdoba was presented at the 2002 Paris Motor Show, as the four door saloon version of the SEAT Ibiza Mk3 hatchback, featuring a boot capacity of 485 litres (17.1 cu ft), which could be increased to 800 litres (28 cu ft) by folding the rear seats. No estate or coupé versions of the second generation were developed.
The Córdoba Mark II shares its chassis and engines with the Volkswagen Polo Mk4 and Škoda Fabia Mk1 and Mk2.
In Mexico, Córdoba production continues in the Volkswagen de México Puebla assembly plant.[year needed] It has the four cylinder 2.0 litre 115 bhp (86 kW; 117 PS) engine combined with a five speed manual or an optional six speed Tiptronic transmission.
Saloons based on successful hatchbacks very rarely become a sales success in Europe after the turn of the 1990s, and the SEAT Córdoba had done little to change that. It is to SEAT what the Jetta and Vento were to Volkswagen, and what the Belmont was to Vauxhall.
The Córdoba was officially withdrawn from sale in the United Kingdom in February 2006, and shortly was removed from SEAT UK’s official website. In other European countries, sales ended in 2009. Production officially ended in November 2008. (Source Wiki)
