KeyFob RKE Programming Procedure: Peugeot 206 1998-2000
Peugeot 206 KeyFob Remote Keyless Entry Programming Procedure
How to Program Peugeot 206 KeyFob Remote Keyless Entry for the year 1998-2000
Re-initializing Procedure
Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst vehicle is out of range and central locking / alarm system becomes inoperative, carry out the following reinitializing procedure.
- Unlock the Drivers door using the key
- Press and hold the “Lock / Unlock” button on the key fob until the LED on the key fob stops flashing.
- Release the “Lock / Unlock” button on the key fob.
- The LED on the key fob should remain illuminated.
- Press and release the “Lock / Unlock” button on the key fob.
- The LED on the key fob should turn “OFF”.
- Open the driver’s side door and sit in the driver’s seat.
- Close the driver’s side door.
- Hold the key fob next to the ignition switch.
- Press and release the “Lock / Unlock” button on the key fob.
- Switch the ignition to the “ON” position.
- Wait 10 seconds.
- Switch the ignition to the “OFF” position.
- Wait 5 seconds.
- Key fob is re-initialized.
- Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.
- Repeat above procedure to re-initialize any remaining key fobs.
About Peugeot 206
It was officially launched in September 1998 in hatchback form, which was followed by a coupé cabriolet (the 206 CC) in September 2000 for the 2001 model year, a station wagon (the 206 SW) in September 2001 for the 2002 model year, and a sedan version (the 206 SD) in September 2005 for the 2006 model year.
In November 2006, the Chinese joint venture Dongfeng Peugeot-Citroën launched a derivative version of the Peugeot 206 known as the Citroën C2, but not technically related with the European-market model. (Source Wiki)
