KeyFob RKE Programming Procedure: Mitsubishi Galant 1994-2004
Mitsubishi Galant 1994-2004 KeyFob Remote Keyless Entry Programming Procedure
How to Program Mitsubishi Galant KeyFob Remote Keyless Entry for the year 1994, 1995, 1996, 1999, 2000, 2003 and 2004.
Key Fob Programming Procedure (Remote)
Programming Procedure
Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly. Maximum of 2 Remotes can be programmed
- Connect a link wire between Pin 4 and Pin 1 on the J1962 Connector
- Close all Doors
- Turn Ignition to ACC position and the back to Off 3 Times with in 10 Seconds
- Doors Should lock then unlock
- Press remote control lock or Unlock button once
- Press remote control lock or Unlock button twice within 10 Seconds
- Doors Should lock then unlock
- Repeat for Second Remote
About Mitsubishi Galant
The United States has had the sedan-only ninth-generation PS platform model since October 15, 2003. It was announced at the 2003 New York International Auto Show in April for the 2004 model year, following the exhibition of the SSS concept sedan at the North American International Auto Show three years before.
The ninth-generation United States-sourced model is available for sale only in a few regional markets, namely the United States, Puerto Rico, Russia, Ukraine and Arabia. Russia began sourcing its Galants from the United States from 2006. The Arabian markets began sourcing their Galants from the United States from the 2007 model year. The Galant had also been available in Canada and Mexico until the 2010 and 2009 model years, respectively. (Source Wiki)
