Honda Accord 1997-2003 KeyFob Remote Keyless Entry Programming Procedure

 

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly. Maximum of 3 Remotes can be programmed.

  • Obtain all remote controls
  • Switch the ignition “ON”
  • Within 4 Seconds – Press the Unlock or Lock Button
  • Within 4 Seconds – Switch the Ignition “OFF”
  • Within 4 Seconds – Switch the Ignition “ON”
  • Within 4 Seconds – Press the Unlock or Lock Button
  • The system should Unlock or Lock the vehicle
  • Within 4 Seconds – Press the Unlock or Lock Button
  • Within 15 Seconds – Press the Unlock or Lock Button of each remote that is to be programmed
  • Switch the Ignition “OFF”
  • Remove the Ignition Key
  • Check the operation of each remote Fob.

KeyFob RKE Programming Procedure: Honda Accord 1997-2003

 

About Honda Accord

For 2003, Honda began to offer a more aggressive Accord Coupe, equipped with the 240 hp (179 kW) and 212 lb⋅ft (287 N⋅m) (244 hp (182 kW) and 211 lb⋅ft (286 N⋅m) for 2006–2007 models) J30A4 2997cc V6 mated to a 6-speed manual transmission borrowed from the Acura TL Type S (without a limited-slip differential). This coupe came with 17-inch wheels (that varied between the 03-05 and 06-07 models), a strut tower bar, perforated leather seating, carbon fiber dash pieces, and an upgraded 180-watt stereo system. Because of the ability to maintain activation of the VTEC system all the way through hard acceleration, the Accord EX V6 6-speed ran from 0–60 mph in 5.9 seconds according to Car and Driver, more than a second faster than the automatic version.

This model was also sold in Japan as the Honda Inspire from 2003 to 2008. In China, the model got the name Guangzhou-Honda Accord and was sold from 2003 up to December 2009. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *