Key Programming: Honda CRZ 2011-2015
Honda CRZ 2011-2015 Key Programming Procedure
The following are the key programming procedures for Honda CRZ for the year 2011 and 2015.
TRANSPONDER PROGRAMS SEPARATELY FROM RKE W/ A DIAGNOSTIC TOOL
1. Within 4 seconds: Press LOCK button or UNLOCK button of first remote transmitter.
2. Within 4 seconds: Switch ignition OFF.
3. Within 4 seconds: Switch ignition ON.
4. Repeat procedure above twice.
5. Within 4 seconds: Press LOCK button or UNLOCK button of first remote transmitter. System should now lock and unlock vehicle to indicate remote programming mode activated.
6. Within 10 seconds:
Press LOCK button or UNLOCK button of first remote transmitter, allowing doors to lock and unlock once. Press LOCK button or UNLOCK button of each remaining remote transmitter to be programmed, allowing doors to lock and unlock once as each remote transmitter is programmed.
7. Switch ignition OFF.
8. Remove key
TRANSPONDER PROGRAMS SEPARATELY FROM RKE W/ A DIAGNOSTIC TOOL ORIGINAL KEY MUST HAVE AN “L” ON THE BLADE
1. ENTER the vehicle and CLOSE all doors. (Each of the following steps must be completed within five seconds of one another. If you take longer than five seconds between steps or make a mistake, you must start the entire procedure over.)
2. INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.
3. PERFORM each of the next three (3) steps in order, then repeat all three (3) steps two (2) more times for a total of three (3) times each.
4. TURN the Ignition to the ON position, marked “II” on the Ignition.
5. PRESS the LOCK button on the remote.
6. TURN the Ignition to the LOCK position, marked “0” on the Ignition. (REPEAT Steps 4-6 two (2) more times)
7. TURN the Ignition to the ON position, marked “II” on the Ignition.
8. PRESS the LOCK button on the remote, the door locks should cycle indicating the vehicle has ENTERED Programming Mode.
9. Within five (5) seconds of entering Programming Mode, PRESS the LOCK button again on the same remote. The door locks should cycle again indicating the vehicle has successfully PROGRAMMED that remote.
10. For programming additional remotes to your vehicle, REPEAT Step 9 with each additional remote one after another. Step 9 must be completed within five (5) seconds for each additional remote. You may program up to three (3) remotes to your vehicle.
11. TURN the ignition to the LOCK position, marked “0” on the Ignition to EXIT Programming Mode.
12. Test all remotes. Programming is now complete.
About Honda CRZ
The 2015 Honda CR-Z hybrid is the vehicle’s fifth model year in its first generation. Following the 2016 model year, Honda discontinued the CR-Z. Minor styling changes and a few standard technology additions, such as a 7-inch touch screen with Pandora internet radio, are among the 2016 CR-updates. Z’s However, if you want to save money, look into the 2013 CR-Z. It’s the first model to come standard with a rearview camera and Bluetooth, as well as a larger lithium-ion battery than previous models. There were no significant changes between the 2014 and 2015 CR-Z models.
The 2015 CR-Z is available in two trim levels: base and EX. The entry-level model includes a CD player, Bluetooth, USB and auxiliary inputs, cruise control, keyless entry, and automatic climate control. The CR-Z EX trim adds a leather-wrapped steering wheel, automatic headlights, and fog lights but no high-tech features. One of the CR-few Z’s available features is a satellite navigation system (EX trim only).
The 2015 Toyota Prius c is a hybrid that prioritizes fuel economy over performance. The Prius c has a poor powertrain and a harsh ride, but it has some of the best fuel economy estimates in the class. In addition, when compared to the Honda, the Toyota has a higher reliability rating, more standard features, and a roomier cabin that seats five people. The Prius c is a superior vehicle to the CR-Z.
