CHEVROLET TRAVERSE Wheel Alignment Specifications for 2020-2023 year model
Chevrolet Traverse Wheel Alignment Specifications for 2020-2023 year model. The Chevrolet Traverse wheel alignment includes specifications in both millimeters (mm) and degrees. Here are the specifications in table format.
Table 1: Chevrolet Traverse Alignment Specifications in degrees (°)
Table 2: Chevrolet Traverse Alignment Specifications in Millimeters (mm)
Wheel Alignment Parameters
1. Camber: Camber is the angle of the wheels when viewed from the front or rear of the vehicle. A wheel that is tilted inward has negative camber, while a wheel that is tilted outward has positive camber. Camber can affect tire wear, handling, and steering.
2. Caster: Caster is the angle of the steering axis when viewed from the side of the vehicle. A positive caster angle means that the steering axis tilts towards the rear of the vehicle, while a negative caster angle tilts towards the front. Caster can affect steering stability and the returnability of the steering wheel to center.
3. Toe: Toe refers to the angle at which the front or rear wheels are tilted inward or outward when viewed from above. If the wheels are tilted inward, this is called “toe in,” while if the wheels are tilted outward, this is called “toe out.” Toe can affect tire wear, handling, and steering.
4. Thrust Angle: The thrust angle is the angle between the vehicle’s centerline and the rear axle’s geometric centerline. It is measured by comparing the direction that the rear wheels are pointing to the centerline of the vehicle. The thrust angle can affect vehicle stability and how straight the vehicle drives. A thrust angle that is not perpendicular to the centerline of the vehicle can cause the vehicle to pull to one side.
* Please note that these specifications are for general guidance only, and the specific alignment settings for a particular vehicle may differ depending on factors such as driving conditions and personal preference. It’s always best to consult a professional mechanic or alignment specialist for the most accurate recommendations for your vehicle.
Wheel Alignment Brief Information
Wheel alignment is the process of adjusting the angles of the wheels so that they are perpendicular to the ground and parallel to each other. Proper wheel alignment is important for several reasons, including:
1. Safety: Properly aligned wheels help ensure that a vehicle travels in a straight line and handles properly, reducing the risk of accidents.
2. Tire Wear: Misaligned wheels can cause uneven tire wear, reducing tire life and requiring more frequent replacements.
3. Fuel Efficiency: When wheels are misaligned, the vehicle may have to work harder to maintain speed, which can result in decreased fuel efficiency and increased costs.
4. Ride Comfort: Properly aligned wheels can result in a smoother ride and better handling, improving overall ride comfort.
About Chevrolet Blazer
General Motors’ Chevrolet Traverse is a full-size crossover SUV with three rows of seating. It shares the same platform as the GMC Acadia and Buick Enclave, known as the Lambda platform for the first generation and the C1XX platform for the second generation. The Cadillac XT6 also rides on the C1XX platform. It is the replacement for the TrailBlazer SUV and Uplander minivan.
The second generation model hit the market in the summer of 2017. As part of Chevrolet’s plans to expand its SUV lineup, the Traverse was positioned above the new mid-size Chevrolet Blazer for the 2019 model year.
The Traverse name was first used for a concept car at the 2003 North American International Auto Show in Detroit, but it was replaced by the Equinox when it was introduced for the 2005 model year. (Source: Wiki)