TPMS Reset: RAM 2500 2011-2019 Tire Pressure Sensor
RAM 2500 2011-2019 Tire Pressure Monitoring System TPMS Reset
Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on RAM 2500 for the year 2011, 2013, 2014, 2017, 2018 and 2019.
Sensor Relearn Procedure without a Scan Tool:
1. Inflate all tires to pressure listed on the placard.
2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.
3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.
4. During the 20 minutes, scan each sensor.
5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.
Sensor Relearn Procedure with a Scan Tool (If Available):
1. Inflate all tires to pressure listed on the placard.
2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.
3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).
4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).
5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.
6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.
7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.
8. With the ignition still in the ON position, re-scan each sensor.
9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.
About RAM 2500
As of 2016, Ram trucks are available in the United States, Canada, Mexico, Brazil, Colombia, Argentina, Chile, Paraguay, Angola, Peru, Europe, and the Middle East. The Ram trucks officially sold in many Latin American countries are outfitted with UNECE WP.29 lighting equipments, including the taillights with separate amber turn signal indicators.
No right-hand-drive version has been built for the United Kingdom, South Africa, and other countries where the rule of road is on the left. In 2016, FCA via the Ateco (ASV) group commenced selling the Ram 2500 and 3500 in Australia and the Ram 1500 in 2018. These are converted to right-hand drive in Australia before the sale. Pricing commences from $80,000AUD (approx US$54,000 as of 28/08/19) for the 1500. (Source Wiki)