TPMS Reset: Mercedes-Benz GLK Class 2010-2016 Tire Pressure Sensor
Mercedes-Benz GLK Class 2010-2016 Tire Pressure Monitoring System TPMS Reset
Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Mercedes-Benz GLK Class for the year 2010, 2013, 2014 and 2016.
No special tools are required to perform this relearn procedure.
Relearn Procedure when Resetting Air Pressure:
1. Inflate all tires to pressure listed on tire placard.
2. Turn the ignition to the ON position with the engine OFF.
3. Press forward/back button on the steering wheel until trip and odometer are displayed.
4. Press UP/DOWN button until tire pressure monitor is displayed.
5. Hold down reset button (located on the instrument cluster) until MONITOR CURRRENT TIRE PRESURE is displayed.
6. Press + button. TIRE RESS. MONITOR‐ACTIVATED‐PRESS. DISPLAY AFTER DRIVING A FEW MINS. Is displayed.
7. If REACTIVATE‐TIRE PRESS. MONITOR! Appears, repeat relearn procedure.
8. If TIRE PRESSURE‐CHECK TIRES! appears, the tire pressure is too low. Adjust pressure(s) accordingly.
Relearn Procedure when Replacing Sensors:
1. Inflate all tires to pressure listed on tire placard.
2. Drive the vehicle for at least 10 minutes at a speed of 15 MPH, or more. All sensor IDs will be memorized automatically.
NOTES: If the vehicle does not relearn the new sensor IDs, verify that the spare wheel was not introduced onto the vehicle. If the sensors that was originally assigned to the spare position is replaced, then the new spare sensor ID has to be register through the OBDII via a properly formatted scan tool.
If the spare tire sensor ID is being programmed, a properly formatted scan tool is necessary.
About Mercedes-Benz GLK Class
Mercedes-Benz USA partnered with four tuners to develop custom designs based on the upcoming 2010 GLK-Class vehicles, as part of the US launch of GLK-Class SUV in 2009.
The Urban Whip is a white roadster built by Boulevard Customs, NBS Performance. Based on the GLK 350 4Matic, it included custom-made wide-body kit developed with RoBrady Design, body lowered by 64mm with custom lowering springs, 26-inch Asanti AF 150 chrome wheels with custom black accents and 295/25 ZR26 Pirelli Scorpion tires, front and rear Brembo performance brake kit with 381mm 2-piece floating rotors and 8-pot front callipers and 344mm 2-piece floating rotors with 4-piston rear callipers, 5.7 kW custom stereo system with eight HD amps and six new JL Audio 13TW5 flat subwoofers. (Source Wiki)
