counter create hit

TPMS Reset: Mercedes-Benz GLC 2016-2019 Tire Pressure Sensor

0
TPMS Reset-Mercedes-Benz GLC 2016-2019 Tire Pressure Sensor

Mercedes-Benz GLC 2016-2019 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Mercedes-Benz GLC for the year 2016 and 2019.

No special tools are required to perform this relearn procedure.

 

Relearn Procedure when Resetting Air Pressure:

1. Inflate all tires to pressure listed on tire placard.

2. Turn the ignition to the ON position with the engine OFF.

3. Press forward/back button on the steering wheel until trip and odometer are displayed.

4. Press UP/DOWN button until tire pressure monitor is displayed.

5. Hold down reset button (located on the instrument cluster) until MONITOR CURRRENT TIRE PRESURE is displayed.

6. Press + button. TIRE RESS. MONITOR‐ACTIVATED‐PRESS. DISPLAY AFTER DRIVING A FEW MINS. Is displayed.

7. If REACTIVATE‐TIRE PRESS. MONITOR! Appears, repeat relearn procedure.

8. If TIRE PRESSURE‐CHECK TIRES! appears, the tire pressure is too low. Adjust pressure(s) accordingly.

 

Relearn Procedure when Replacing Sensors:

1. Inflate all tires to pressure listed on tire placard.

2. Drive the vehicle for at least 10 minutes at a speed of 15 MPH, or more. All sensor IDs will be memorized automatically.

NOTES: If the vehicle does not relearn the new sensor IDs, verify that the spare wheel was not introduced onto the vehicle. If the sensors that was originally assigned to the spare position is replaced, then the new spare sensor ID has to be register through the OBDII via a properly formatted scan tool.

If the spare tire sensor ID is being programmed, a properly formatted scan tool is necessary.

 

 

About Mercedes-Benz GLC

The Mercedes-Benz GLC-Class (X253/C253) is a compact luxury crossover SUV introduced in 2015 for the 2016 model year that replaces the GLK-Class. According to Mercedes-Benz, it is the SUV equivalent to the C-Class.

Under the vehicle naming scheme maintained by Mercedes-Benz, SUVs use the base name “GL”, followed by the model’s placement in Mercedes-Benz hierarchy. The “G” is for Geländewagen (German for off-road vehicle) and alludes to the long-running G-Wagen. This is followed by the letter “L” that acts as a linkage with the letter “C” to signify that the vehicle is a SUV equivalent to the C-Class. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!