counter create hit

TPMS Reset: Jeep Commander 2006-2010 Tire Pressure Sensor

TPMS Reset-Jeep Commander 2006-2010 Tire Pressure Sensor

Jeep Commander 2006-2010 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Jeep Commander for the year 2006, 2007, 2008 and 2010.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to pressure listed on the placard.

2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.

3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.

4. During the 20 minutes, scan each sensor.

5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.

Sensor Relearn Procedure with a Scan Tool (If Available):

1. Inflate all tires to pressure listed on the placard.

2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.

3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).

4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).

5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.

6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.

7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.

8. With the ignition still in the ON position, re-scan each sensor.

9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.

About Jeep Commander

The Jeep Commander was discontinued after the 2010 model year. Chrysler announced that the 2011 Dodge Durango would be its successor; which is produced alongside its platform-mate the 2011 Jeep Grand Cherokee at Jefferson North Assembly in Detroit, Michigan. Shortly after production ended, Chrysler CEO Sergio Marchionne said of the Commander, “That vehicle was unfit for human consumption. We sold some. But I don’t know why people bought them.”

In 2017, Jeep released a three-row concept vehicle based on the Jeep Cherokee (KL) platform for the Chinese market, called the Jeep Yuntu, utilizing a plug-in gasoline/electric hybrid power train.

A three-row version of the Jeep Cherokee (KL) with slightly altered styling was released exclusively for the Chinese market named the Jeep Grand Commander. While similar in size to the original Commander, the Grand Commander will offer four-cylinder power. It will not be sold in any other markets. (Source Wiki)


Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!