KeyFob RKE Programming Procedure: Mitsubishi Outlander 2004-2007

Mitsubishi Outlander 2004-2007 KeyFob Remote Keyless Entry Programming Procedure

How to Program Mitsubishi Outlander KeyFob Remote Keyless Entry for the year 2004 and 2007.

Key Fob Programming Procedure (Remote)

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly. Maximum of 2 Remotes can be programmed.

Connect a link wire between Pin 4 and Pin 1 on the J1962 Connector
Close all Doors
Turn Ignition to ACC position and the back to Off 3 Times with in 10 Seconds
Doors Should lock then unlock
Press remote control lock or Unlock button once
Press remote control lock or Unlock button twice within 10 Seconds
Doors Should lock then unlock
Repeat for Second Remote

About Mitsubishi Outlander

The second generation Outlander went on sale in Europe in February 2007, and this time included a diesel engine – essential in the European market at the time. Mitsubishi chose to purchase Volkswagen’s 2.0-litre Pumpe-Düse unit with 140 PS (103 kW), as also installed in the European market Grandis.

Before this even went on sale, Mitsubishi had decided that there was a need for a more powerful diesel option and by November 2007 higher end diesel models received PSA’s 2.2-liter DW12 common rail diesel with 156 PS (115 kW). Both diesels were labelled “Di-D” by Mitsubishi. In September 2010 Mitsubishi’s own 2.3-liter 4N14 diesel engine with 177 PS (130 kW) was introduced while the Volkswagen engine was discontinued. The PSA unit continued to be available in certain countries. (Source Wiki)